ARB digital Inflator compatible with ARB compressor

Suitable for CKMA12 2-00011 compressor and CKMTA12 2-00051 twin compressor.The ARB air tank 2-171507 and the air tank holder 2-T0601030 are required to mount an additional 4L ARB air tank.Kit contains: 1x Base Bracket 1x Screw kit 1x Installation instruction Does not fit brushless compressors

Achtung:Die Differentialsperre und das Kegel- & Tellerrad müssen separat bestellt werden.

9,3 - 10,3 bar Ducted IP55, 102x190x275mmPlease note:for using in conjunction with ARB Airlocker Mainifold-Kit 2-171503 is recommended.weight 8.8 kg

Features: High temperature air hose Lenght: 7m rated to 10 bar (150psi) US standard fittings The hose is seven meters in length, allowing for use with bigger vehicles and less bends. It's made from a durable and user-friendly material with a high-quality internal structure, which also prevents kinking and unwanted bending during use. The new improved Air Coupling has been designed and produced to ensure air leaks are a thing of the past.

Kit includes: 1 x Extensionpiece 1 x Hose Coupling US 1 x Hose Coupling Dust Cap

To be able to use a tire inflation connection, we recommend using the following additional set:2-T0601030-1Suitable for 4L ARB air tank 2-171507Kit contains: 1x mounting bracket 2x hose clamp 12x 140-160mm 1x extension fitting 1x Reducing nipple 1x ARB Hose Reinforced 30cm 1x Installation instruction

ARBs Aluminium Air Tank is 4L [1gal] in capacity and is rated to a working pressure of 1030kPa [150PSI]. Its aluminium construction makes it light weight and easily mountable. Adding this air tank to your compressed air system will increase its compressed air storage capacity and will enable ARBs Maximum Performance On-Board Air Supply (CKMTA) to operate most air powered tools.The matching adapters and air lines must

Included in Kit: High temperature air hose Lenght: 7m rated to 10 bar (150psi) US standard fittings 1x quick-connect ARB Air Coupling with Dust Cap 1x quick-connect ARB Tyre Inflation Chuck. Only to be screwed directly into the compressor - not compatible with reinforced Hose. This purpose is served by hose coupling US STD NPT 1PK 2-0740111 2-0740111 1x T-piece adapter 1x tyre bead seating fitting 1x inflation accessory kit The hose is seven meters in length, allowing for use with bigger vehicles and less bends. It's made from a durable and user-friendly material with a high-quality internal structure, which also prevents kinking and unwanted bending during use. The new improved Air Coupling has been designed and produced to ensure air leaks are a thing of the past and it also includes a dust cap now. Another key element in this kit is the Tyre Inflator Chuck. Designed to be a quick connect and disconnect head, it makes inflating an absolute breeze. Does not suit 2-00010

The color of the item may possibly differ from the one shown.Adapterkit enables to use EU standardconnections to ARB compressorcouplers.

Sealed for moisture and dust resistance Hard anodised cylinder bore and teflon impregnated carbon fibre piston seal for reduced friction and maximum trouble free life.Anodised mounting bracket dissipates motor heat and allows the compressor to be repositioned 180 degrees.Heavy duty Maxi-Fuse equipped for professional in-line circuit protection. Quality components for quiet operation and extra long life. Constructed entirely of lightweight, high strength engineering grade materials. Over-pressure safety valve equipped Motor is internally thermal protected against extreme temperature damage.

For most vehicles OME has different coil springs in different lengths and/ or spring rates in the offer to accommodate the different engines, equipment and especially permanent additional weight due to retrofitted accessories. It is not necessarily the wire gauge and length that matter. The number of windings, the associated pitch and the outer diameter are also used here to achieve the desired tuning. The material used also plays a major role, especially compared to the original spring.To densify and relax the surface, all OME coil springs are shot peened after coiling and then powder coated.Since some vehicles have weight differences from right to left, OME springs are only supplied in pairs, sometimes with springs of different lengths for the right and left sides. In addition, many vehicles have the option of compensating for one-sided sagging with "trim packers".

For most vehicles OME has different coil springs in different lengths and/ or spring rates in the offer to accommodate the different engines, equipment and especially permanent additional weight due to retrofitted accessories. It is not necessarily the wire gauge and length that matter. The number of windings, the associated pitch and the outer diameter are also used here to achieve the desired tuning. The material used also plays a major role, especially compared to the original spring.To densify and relax the surface, all OME coil springs are shot peened after coiling and then powder coated.Since some vehicles have weight differences from right to left, OME springs are only supplied in pairs, sometimes with springs of different lengths for the right and left sides. In addition, many vehicles have the option of compensating for one-sided sagging with "trim packers".

Damper rear only for 4x4 vehicle. KONI Special Series 87...Twin-Tube hydraulic shock absorber without gas. Stepless adjustable when dismanled. Conditionally recommended for Offroad use and vehicles with moderate raised suspension.

Does not suit Iglhaut 4x4 KONI Special Series 87...Twin-Tube hydraulic shock absorber without gas. Stepless adjustable when dismanled. Conditionally recommended for Offroad use and vehicles with moderate raised suspension.

Please note:only works in conjunction with OME Springs and for Jimny GJ additional Mounting Kit 23-6090 is required. Heavy Track Series 80/82.... Twin-Tube schock absorber without gas. Stepless adjustable when dismantled. Suitable for Offroad use and some vehicles with moderate raised suspension. High quality, low cost replacement for series shocks.

Heavy Track Series 80/82.... Twin-Tube schock absorber without gas. Stepless adjustable when dismantled. Suitable for Offroad use and some vehicles with moderate raised suspension. High quality, low cost replacement for series shocks.

ARB Air-Locker, for front and rear axle 3/93+, 24 teeth. Provides 100% traction on demand without affecting on-road drivability or driveline wear.Vastly improved traction means less reliance on momentum, thus reducing the likelihood of vehicle damage and environmental impact.Easy, convenient operation allows the user to concentrate on the terrain without leaving the comfort and safety of the driver's seat.Ultra durable and extremely strong - only the highest quality materials are used in construction.Incredibly simple yet effective design that employs minimal moving parts, thereby ensuring maximum reliability.Air compressor also provides convenient, reliable source of air for inflating tyres, camping and leisure equipment.Please note:Any accessories shown, such as roller bearings, are not included in the scope of delivery.The installation should be carried out by a specialist. If an OE Diff-Locker is present, it cannot be replaced by an ARB Airlocker, or only with increased installation effort.

Use this hose to deliver air from your Compressor throughout your vehicle.

Use this hose to deliver air from your Compressor throughout your vehicle.

Air Tank 2-171507 is highly recommended

The brushless motors of the new ARB compressors deliver up to 50% more power compared to the previous ARB compressors.The brushless technology means that the compressors require less maintenance, as there are no components that are vulnerable to wear. Electronically controlled fans ensure that the operating temperature of the compressor remains optimal by continuing to run even when the compressor is no longer in use.The system also offers protection against voltage peaks, drops or fluctuations and against overcurrent. Integrated live diagnostics provide acoustic and visual warnings to detect problems early on.

The brushless motors of the new ARB compressors deliver up to 50% more power compared to the previous ARB compressors.The brushless technology means that the compressors require less maintenance, as there are no components that are vulnerable to wear. Electronically controlled fans ensure that the operating temperature of the compressor remains optimal by continuing to run even when the compressor is no longer in use.The system also offers protection against voltage peaks, drops or fluctuations and against overcurrent. Integrated live diagnostics provide acoustic and visual warnings to detect problems early on.

Incl. 2x Osram SX180-SPDoes NOT fit in combination with a winch mounting carrier.Vehicle specific headlight kit that not only provides great light output, but also adds a nice accent without disturbing the vehicle design.Kit includes: Vehicle specific mounting carrier (incl. Fitting Instruction) 2x OSRAM Spot Headlights 36-3LEDDL105-SP 1x Universal Cable Harness 2-3500520The Universal Cable harness enable a integration to the Vehicle driving beam. For some vehicles it may have to be reworked. We recommend a professional Workshop. Also a switch is included to make a separate circuit. But this soulution is not StVZO compatible.

The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

Suits GJ and HJ

Base bracket for mounting the ARB compressors CKMA in the engine compartment of a Mercedes Sprinter 2013 on. Please note also:The bracket can be extended by the mounting plate 2-T001, which allows the attachment of the CKMTA double compressor and further accessories, such as the mounting of the ARB air tank 2-171507.Please Note: Does not fit ARB Brushless Compressors

Mounting Kit allows fittment of ARB-Air-Compressors-Models. An additional Universal bracket willalso allow the fitment of the 4L ARB AirTank.

Please note:Any accessories shown, such as roller bearings, are not included in the scope of delivery.The installation should be carried out by a specialist. If an OE Diff-Locker is present, it cannot be replaced by an ARB Airlocker, or only with increased installation effort.

The Air Locker Manifold Kit enables the installation of Air Locker solenoids to an air source (max 10bar [150PSI]) such as an ARB compressor or a regulated gas bottle.Kit includes: Manifold body with mounting bracket 2 x 1/8BSPP ports for installation of up to 2 x Air L 2 x 1/4 NPT ports, one to be used as an input and the second could be used for installation of a pump up kit 1 x high temperature resistant Teflon stainless steel braided hose with heavy duty JIC4 fittings 2 x JIC4 - 1/4NPT nipples to connect the compressor outlet and manifold kit input 2 x M6 hex head bolt and nylon lock-nuts for securing the manifold kit

Kit contains: Mounting bracket (3 positions) Screwkit 2x 90° Elbow Adapter 2-0740104 1x Adapter 1/4NPT to (M) JIC-04(M) (2-0740101) 1x US STD Quick Connector with 1/4 NPT thread 2-0740111

Also suitable for gearboxes and transfer cases. Attention: Adjustments and adapter may be required - there is no vehiclespecific information. Kit Contents: Manifold with 5 ports and 2 mounting holes 4 x 1/8"BSP ports for connecting up to 4 breather lines 1 x 1/4"NPT ports for the air filter Air filter assembly 4 x 8mm-1/8"BSP push in fittings 3 x 1/8"BSP plugs for plugging unused ports 8m x 8mm Polyethylene tubing 2x self tapping screws 25 x cable ties

This supplementary bracket allows for fitment to vehicle specific compressor mount kits.Features & Benefits: Adapting the new air tank to fit onto the existing holes Powder coated in satin black finish Only required for the following vehicle specifc mounting kits: 2-3515130 Toyota LC J200 {2-3521080} Toyota LC J150 2-3550210 Jeep Wrangler JK 2-3550220 Jeep Gladiator JT & Wrangler JL Mountingplate 2-T001 Y62 Patrol

Use this fitting to split air from 1/4 NPT(M) to 1/4 NPT(F) & 1/4 NPT(F)

Use this fitting to connect a male JIC-04 flare fitting (for example from a compressor outlet) to a hose where space is limited and the hose must bend sharply.

Use this fitting to split air from one hose into two

This reducer or adapter allows the connection between hose (2-07402XX) on an ARB compressor (e.g. 2-00011 CKMA12)

The brushless motors of the new ARB compressors deliver up to 50% more power compared to the previous ARB compressors.The brushless technology means that the compressors require less maintenance, as there are no components that are vulnerable to wear. Electronically controlled fans ensure that the operating temperature of the compressor remains optimal by continuing to run even when the compressor is no longer in use.The system also offers protection against voltage peaks, drops or fluctuations and against overcurrent. Integrated live diagnostics provide acoustic and visual warnings to detect problems early on.

Features: Suits all models 2022 on and models 2018 on with OM654 engine. Kit contains: Winch carrier Winch WARN VR EVO 10s WARN socket extension WARN 2 in 1 Wired/Wireless RemoteFitting time: approx 480 min

The world's first winch friction pulley with patented rope retention feature. A lightweight alternative to traditional heavy snatch blocks/pulleys. The RRP can be used to increase pulling power or redirect the winch line. The RRP is for use with SYNTHETIC ROPE ONLY and is to be used in conjunction with a soft shackle. During momentary slack, patented rope retention rubber fingers prevent ynthetic winch rope from escaping the pulley groove preventing premature rope failure. The oversized hole radius provides a smooth rubbing surface and keeps the legs of the soft shackle from rubbing on the edges of the RRP. The critical friction surface has also been TEFLON treated to increase slickness and heat dissipation.For Synthetic Rope Diameters 5/16 to 1/2 inch (8-12mm)Billet machined 6000 series aluminumMil-A-8625 F Hard Anodized SurfaceWLL 9.979 kg (97,9 KN)Weight: 0,595 kgMade in the USA