ARB Pump Up Kit, 7 m

Sealed for moisture and dust resistance Hard anodised cylinder bore and teflon impregnated carbon fibre piston seal for reduced friction and maximum trouble free life.Anodised mounting bracket dissipates motor heat and allows the compressor to be repositioned 180 degrees.Heavy duty Maxi-Fuse equipped for professional in-line circuit protection. Quality components for quiet operation and extra long life. Constructed entirely of lightweight, high strength engineering grade materials. Over-pressure safety valve equipped Motor is internally thermal protected against extreme temperature damage.

Suitable for CKMA12 2-00011 compressor, CKMTA12 2-00051 twin compressor,CKBLA12 2-00061 Brushless compressor and CKBLTA 2-00081 Brushless twin compressor.The ARB air tank 2-171507 and the air tank holder 2-T0601030 are required to mount an additional 4L ARB air tank.Kit contains: 1x Base Bracket 1x Screw kit 1x Installation instruction

9,3 - 10,3 bar Ducted IP55, 102x190x275mmPlease note:for using in conjunction with ARB Airlocker Mainifold-Kit 2-171503 is recommended.weight 8.8 kg

The color of the item may possibly differ from the one shown.Adapterkit enables to use EU standardconnections to ARB compressorcouplers.

Dimensions approx.: 35x20x8mm

Air Tank 2-171507 is highly recommended

Achtung:Die Differentialsperre und das Kegel- & Tellerrad müssen separat bestellt werden.

Use this hose to deliver air from your Compressor throughout your vehicle.

Keeping accurate tyre pressure for your tyres is a necessity for good fuel economy, prolonged tyre life and maximum traction. Introducing the new ARB digital tyre inflator which provides accurate reading and inflation for your next 4WD adventure.Most four wheel drivers understand the the importance of running the correct tyre pressures for different situations and or load variances. This is why its so important to carry an accurate air pressure gauge and tyre inflation equipment in your vehicle, especially when driving off road. The he new ARB digital tyre inflator makes checking and adjusting your vehicles tyre pressures a fast and simple operation thanks to its large easy to read digital blue backlight display, big humb operated inflator button and easy access deflator bleed button.Features:

Außenmaß: 34 x 18 x 6 mm

ARBs Aluminium Air Tank is 4L [1gal] in capacity and is rated to a working pressure of 1030kPa [150PSI]. Its aluminium construction makes it light weight and easily mountable. Adding this air tank to your compressed air system will increase its compressed air storage capacity and will enable ARBs Maximum Performance On-Board Air Supply (CKMTA) to operate most air powered tools.The matching adapters and air lines must

The Air Locker Manifold Kit enables the installation of Air Locker solenoids to an air source (max 10bar [150PSI]) such as an ARB compressor or a regulated gas bottle.Kit includes: Manifold body with mounting bracket 2 x 1/8BSPP ports for installation of up to 2 x Air L 2 x 1/4 NPT ports, one to be used as an input and the second could be used for installation of a pump up kit 1 x high temperature resistant Teflon stainless steel braided hose with heavy duty JIC4 fittings 2 x JIC4 - 1/4NPT nipples to connect the compressor outlet and manifold kit input 2 x M6 hex head bolt and nylon lock-nuts for securing the manifold kit

Kit contains: Mounting bracket (3 positions) Screwkit 2x 90° Elbow Adapter 2-0740104 1x Adapter 1/4NPT to (M) JIC-04(M) (2-0740101) 1x US STD Quick Connector with 1/4 NPT thread 2-0740111

Use this hose to deliver air from your Compressor throughout your vehicle.

Its frustrating to get flat tyres, but sooner or later its going to happen. Being prepared can turn your emergency into a quick fix and save having to use your spare. Supplied in a compact, high visibility carry case, the ARB Speedy Seal series II, includes all the components necessary to repair up to 40 tubeless radial or cross ply tyres, without removing the tyre from the vehicle or rim.The perfect companion to your recovery kit, the ARB Speedy Seal II includes a premium spring steel insertion needle with cast handle, hardened steel reamer tool, 40 vulcanizing repair cords, lubricant, quality pliers, blade, spare valve caps, allen key and a dual chuck pencil type tyre gauge to make checking your pressures a snap.Great value at the same affordable price, the updates to the ARB Speedy Seal II over its predecessor includes 10 additional self-vulcanizing repair cords, quality pliers, spare valve stems, blade and improved high Vis orange case, making the ARB Speedy Seal Series II a true all in one kit for emergency tyre repairs.Additional packs of self-vulcanizing repair cords (50 cords) can be ordered as part number 35-ARB10100010 to keep your ARBSpeedy Seal Series II stocked and ready for many years of service.Features: High Vis strong plastic molded case Spring steel insertion needle with classic ARB logo Hardened reamer tool with classic ARB logo 40 Self vulcanizing repair cords (Repair up to 40 tyres with one kit) Pointy nose pliers with cutters Allen key Tyre gauge dual chuck Lubricant Valve Accessories

Use this fitting to connect a male JIC-04 flare fitting (for example from a compressor outlet) to a hose where space is limited and the hose must bend sharply.

To be able to use a tire inflation connection, we recommend using the following additional set:2-T0601030-1Suitable for 4L ARB air tank 2-171507Kit contains: 1x mounting bracket 2x hose clamp 12x 140-160mm 1x extension fitting 1x Reducing nipple 1x ARB Hose Reinforced 30cm 1x Installation instruction

This reducer or adapter allows the connection between hose (2-07402XX) on an ARB compressor (e.g. 2-00011 CKMA12)

The brushless motors of the new ARB compressors deliver up to 50% more power compared to the previous ARB compressors.The brushless technology means that the compressors require less maintenance, as there are no components that are vulnerable to wear. Electronically controlled fans ensure that the operating temperature of the compressor remains optimal by continuing to run even when the compressor is no longer in use.The system also offers protection against voltage peaks, drops or fluctuations and against overcurrent. Integrated live diagnostics provide acoustic and visual warnings to detect problems early on.

Please note that this item is only the T shape without the channel nuts, screws and washers.

For most vehicles OME has different coil springs in different lengths and/ or spring rates in the offer to accommodate the different engines, equipment and especially permanent additional weight due to retrofitted accessories. It is not necessarily the wire gauge and length that matter. The number of windings, the associated pitch and the outer diameter are also used here to achieve the desired tuning. The material used also plays a major role, especially compared to the original spring.To densify and relax the surface, all OME coil springs are shot peened after coiling and then powder coated.Since some vehicles have weight differences from right to left, OME springs are only supplied in pairs, sometimes with springs of different lengths for the right and left sides. In addition, many vehicles have the option of compensating for one-sided sagging with "trim packers".

Please note:only works in conjunction with OME Springs and for Jimny GJ additional Mounting Kit 23-6090 is required. Heavy Track Series 80/82.... Twin-Tube schock absorber without gas. Stepless adjustable when dismantled. Suitable for Offroad use and some vehicles with moderate raised suspension. High quality, low cost replacement for series shocks.

Heavy Track Series 80/82.... Twin-Tube schock absorber without gas. Stepless adjustable when dismantled. Suitable for Offroad use and some vehicles with moderate raised suspension. High quality, low cost replacement for series shocks.

This item is supplied without mounting material.The following components can be installed on the mounting plate: 2-00051, ARB twin compressor 2-00011, ARB Compressor 2-171507, ARB Airtank 4L (suits only in conj. with 2-0830003 2-171503 ARB Aircompressor manifold kit 2-0740112, ARB Hose couplingDoes not fit ARB BrushlessCompressors

Please note:Any accessories shown, such as roller bearings, are not included in the scope of delivery.The installation should be carried out by a specialist. If an OE Diff-Locker is present, it cannot be replaced by an ARB Airlocker, or only with increased installation effort.

Features: High temperature air hose Lenght: 7m rated to 10 bar (150psi) US standard fittings The hose is seven meters in length, allowing for use with bigger vehicles and less bends. It's made from a durable and user-friendly material with a high-quality internal structure, which also prevents kinking and unwanted bending during use. The new improved Air Coupling has been designed and produced to ensure air leaks are a thing of the past.

Use this hose to deliver air from your Compressor throughout your vehicle.

Use this hose to deliver air from your Compressor throughout your vehicle.

The brushless motors of the new ARB compressors deliver up to 50% more power compared to the previous ARB compressors.The brushless technology means that the compressors require less maintenance, as there are no components that are vulnerable to wear. Electronically controlled fans ensure that the operating temperature of the compressor remains optimal by continuing to run even when the compressor is no longer in use.The system also offers protection against voltage peaks, drops or fluctuations and against overcurrent. Integrated live diagnostics provide acoustic and visual warnings to detect problems early on.

The softshackles are feather-light and flexible with a enormous breakingload. Originally developed for rigging at sea this useful helpers become more and more popular in the offroad and forestry scene. Pros.: feather-light(120g) and flexible with a huge breaking load enormous working load of 4000kg enormous breaking load of 7000KG made of Dyneema® lower noise level and a minimum of injury potential(Non-Metal-Construction) no undesired opening on load no hook, no thimble that can scratch your vehicle paintwork

loading capacity 300 daN,

loading capacity 300 daN,

500 daN loading capacity

A really clever new accessory from ARB is the tire pressure gauge with quick release function, which makes it easy to lower the air pressure for off-road use.Here's how it works:First, the brass cap is placed on the valve and then the valve insert is turned out - which can thus also not be lost. The desired tire pressure is now set through a sliding valve. This can be done very precisely, as the tire pressure can be read on the pressure gauge. Then screw the valve insert back in and "ready"!

For most vehicles OME has different coil springs in different lengths and/ or spring rates in the offer to accommodate the different engines, equipment and especially permanent additional weight due to retrofitted accessories. It is not necessarily the wire gauge and length that matter. The number of windings, the associated pitch and the outer diameter are also used here to achieve the desired tuning. The material used also plays a major role, especially compared to the original spring.To densify and relax the surface, all OME coil springs are shot peened after coiling and then powder coated.Since some vehicles have weight differences from right to left, OME springs are only supplied in pairs, sometimes with springs of different lengths for the right and left sides. In addition, many vehicles have the option of compensating for one-sided sagging with "trim packers".

Damper rear only for 4x4 vehicle. KONI Special Series 87...Twin-Tube hydraulic shock absorber without gas. Stepless adjustable when dismanled. Conditionally recommended for Offroad use and vehicles with moderate raised suspension.

Base bracket for mounting the ARB compressors CKMA in the engine compartment of a Mercedes Sprinter 2013 on. Please note also:The bracket can be extended by the mounting plate 2-T001, which allows the attachment of the CKMTA double compressor and further accessories, such as the mounting of the ARB air tank 2-171507.Please Note: Does not fit ARB Brushless Compressors

Please Note: Only works in combination with the Hose Coupling US STD NPT 1PK 2-0740111.Like the unique destinations our customers travel to, each vehicle fit out is different to the next.With this notion in mind, the fabrication engineers at ARB continue to develop new and exciting products to help the customer create a purposeful vehicle they are proud of, and to make the process of installation that much easier for our teams.Features: Easily integrates into existing or new Outback Solutions Roller Drawer systems Fits many existing plastic trim panels in modern vehicles Recessed switch placement provides complete side protection and reduces front damage Recessed air coupling placement reduces its exposure and partially protects its side Textured black provides an OE looking, high quality resistant finish Complete fitment kit for convenient and fast installationSet includes 1 x Universal ARB Switch and Air Coupling Bracket 1 x Cutting template 1 x Fit kit 4x M6 flat washers 4x M6 flange nuts 4x M6x16 button head screws

Also suitable for gearboxes and transfer cases. Attention: Adjustments and adapter may be required - there is no vehiclespecific information. Kit Contents: Manifold with 5 ports and 2 mounting holes 4 x 1/8"BSP ports for connecting up to 4 breather lines 1 x 1/4"NPT ports for the air filter Air filter assembly 4 x 8mm-1/8"BSP push in fittings 3 x 1/8"BSP plugs for plugging unused ports 8m x 8mm Polyethylene tubing 2x self tapping screws 25 x cable ties

Use this fitting to connect a BSP port on a compressor, manifold kit, or Air Locker Solenoid, to a 07402XX hose.

The 50-16SSIT2 replaces the previous version 50-16SSIT and now only contains 2 instead of 4 base brackets. Also the universal adapters are no longer included, these are now available seperately under item number 50-16USIT. This is not because Rhino-Rack wants to provide less, but rather because initial experience with the previous version has shown that it is a quick-release system that serves a very specific purpose on the vehicle. The best example of this is the Sunseeker awning, which already has a 50-16SSIT2 and a 50-16USIT universal adapter kit included. In difficult or changing storage conditions, an additional 50-16SSIT2 which is mounted on the opposite side of the vehicle, makes it easy to move the anwing from one side to the other or even back and forth between two vehicles.When mounting light bars or rollers, the following adapters are needed: Light bars adapter: 50-16ISITRollers adapter: 50-16OSITFeatures: Compatible with Pioneer Platforms, Vortex and Reconn-Deck Quick and easy removel of side mounted accessories Zwifloc channel nuts allow brackets to be placed without moving other accessories 20 Kg max load per bracket pair weight: 1 Kg Contents included: 2 STOW iT Base Brackets

The Stow iT Awning Adaptor is the perfect option to mount the Rhino-Rack Batwing or Sunseeker Awning to your vehicle. The Awning Adaptor is used to conjunction with the Stow iT Base Bracket 50-16SSIT2 where it simply slides into the base bracket giving you the option to remove and store the awning when not in use.Can only be used with the Stow iT Starter Kit or Base Brackets: STOW iT Base Brackets 50-16SSIT2 Features: Two mounting holes and a slot provide the flexibilty to mount a Batwing or Sunseeker Awning at different heights. Slides in and out of the Stow iT base bracket allowing the awning to be removed with ease when not in use Maxium Load: 20kg per pair.

Specifically designed to stretch under load for maximum performance, an ARB snatch strap is a very effective method of extracting a bogged or immobilised 4WD when a second vehicle is present. ARB snatch straps are elastic, the benefits of which are twofold. Firstly, the kinetic energy generated by the elasticity actually aids the recovery itself, and secondly, the elasticity greatly reduces the likelihood of vehicle damage during recovery. The weight of each 4x4 and the weighted force of whatever caused the immobilisation puts enormous strain on the points where the strap is attached, and without some elasticity, there is a substantial risk of damaging the vehicle.

Suits also Taubenreuther winch mounting kit 16-60210NW, 16-60210-PREM, 16-60210-ULTI und 16-60210-V8500.The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

Not compatible with 5t chassis.The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

Suits GJ and HJ

For Jimny GJ 2018 on Adjuster nut 2-100601SP has to be ordered separately.Please note:Any accessories shown, such as roller bearings, are not included in the scope of delivery.The installation should be carried out by a specialist. If an OE Diff-Locker is present, it cannot be replaced by an ARB Airlocker, or only with increased installation effort.

The solenoid valve can be screwed in line and has a 1/8 Bsp thread.

Mit diesem Zusatzkit können z. B. Getriebe und Verteielrgetriebe in die Entlüftung mit eingebunden werden.

Use this fitting to split air from one hose into two

This adapter piece enables the the connection between hose (2-07402XX) on another hose of the series (2-07402XX).

Engineered to suit any off road adventure, ARB portable compressors come complete with a 6 metre air hose, inflation kit, battery clips, hard mounted activation switch and circuit protection. For protection and practicality, each kit is housed in a durable carry case.Features: Designed for inflating tyres Suitable for many air tools (in conjunction with a 4L air tank) Sealed for moisture and dust resistance Teflon impregnated carbon fibre piston seals for maximum trouble free life Integrated pressure switch, relays and IP55 (waterproof/dustproof) brushless fan cools electronics, motors and cylinder heads Anodised mounting bracket dissipates heat Over-pressure safety valve equipped

Features: Suits all models 2022 on and models 2018 on with OM654 engine. Fits only 4x4 and rear-wheel-drive. Does not fit front-wheel-drive vehicles. Kit contains: Winch carrier Winch WARN VR EVO 10s WARN socket extension WARN 2 in 1 Wired/Wireless RemoteFitting time: approx 480 min

M8 Schrauben für die Sicherung

Features: Weight: 3,6 kg Supplied as a set of four Can attach to the dovetail on any location of the BASE Rack Powder-coated aluminium blocks

Features: Weight: 8,5 kg Ideal for mounting Roof Top tents Mounts between cross beams of BASE Rack Brackets made from strong powder-coated steel Four (4) brackets per kit, includes fasteners forclamp mounting

height: 122mm width: 88mm without pressure switch weight: 2,3kg motor voltage: 12 volt maximum amp draw: 10 A flow rate: no load 25l, 13l at 29 psi

length: 1997mm

Rhino Rack HD crossbar (Heavy Duty) is not only perfect for commercial use, but also for home use. You can choose from countless accessories, which will meet almost every need. Ideal for work are the various holders for e.g. ladders and your transport goods. Due to the square dimension of 40 x 40 mm, the crossbar is also suitable for many roof tent mounts.Specifications: Designed for heavy duty and commercial use Extruded structual aluminium Strong and durable for offroad and commercial use Large range of commercial carrying solutions available Rubber strips included Rhino Rack HD crossbar (Heavy Duty) is not only perfect for commercial use, but also for home use. You can choose from countless accessories, which will meet almost every need. Ideal for work are the various holders for e.g. ladders and your transport goods. Due to the square dimension of 40 x 40 mm, the crossbar is also suitable for many roof tent mounts.Specifications: Designed for heavy duty and commercial use Extruded structual aluminium Available in silver or black powder coated Strong and durable for offroad and commercial use Large range of commercial carrying solutions available Rubber strips includedDimensions: 40 x 40 mmBar Lengths Available: 1120 mm 1250 mm 1375 mm 1500 mm 1650 mm 1800 mm 2000 mm

OSRAM's LED worklights and auxiliary lights offer the most demanding LED technology on the market.Attention: High beam and fog lights must be installed in pairs (except single mount).The manufacturer OSRAM grants a warranty of 5 years on LED worklights and auxiliary lights.The warranty conditions, scope as well as the address(es) of the manufacturer can be found at:www.osram.deYour statutory warranty remains unaffected.

OSRAM's LED worklights and auxiliary lights offer the most demanding LED technology on the market.Attention: High beam and fog lights must be installed in pairs (except single mount).The manufacturer OSRAM grants a warranty of 5 years on LED worklights and auxiliary lights.The warranty conditions, scope as well as the address(es) of the manufacturer can be found at:www.osram.deYour statutory warranty remains unaffected.

Please note:The TRED Pro Mounting Bracket is sold as a single unit. Depending on your fitting requirements you may need to purchase two units. Mounting Material for your Roofrack is not included.

OME leaf springs are offered in in different versions for most vehicles in order to meet the different requirements due to different engines and additional weights due to retrofitted accessories. However, it is not only the number of spring layers that is important, but also the material used, the thickness and the bending of the individual layers. In addition, layers can be removed or added to almost any leaf spring. Additional, individual fine tuning is possible by adding or removing polyurethane friction washers and spacers to increase or decrease the inherent friction of the spring.However, all OME leaf springs have the following characteristics: Flattened at the point of contact with the axle; for a clean contact and reduced stress on the spring and U-bolt Wedge- and trapezoidal-shaped ends of the spring layers; for better response and reduced risk of breakage at the highly stressed end tips Lubricatable friction washers, also improves response and noise Replaceable nylon slider bars on the guide brackets to reduce friction and noise All spring layers are shot-peened prior to assembly to reduce surface tension and densify material for longer life After assembly, all spring assemblies are "set" to full load and tested for their desired spring rate

OME leaf springs are offered in in different versions for most vehicles in order to meet the different requirements due to different engines and additional weights due to retrofitted accessories. However, it is not only the number of spring layers that is important, but also the material used, the thickness and the bending of the individual layers. In addition, layers can be removed or added to almost any leaf spring. Additional, individual fine tuning is possible by adding or removing polyurethane friction washers and spacers to increase or decrease the inherent friction of the spring.However, all OME leaf springs have the following characteristics: Flattened at the point of contact with the axle; for a clean contact and reduced stress on the spring and U-bolt Wedge- and trapezoidal-shaped ends of the spring layers; for better response and reduced risk of breakage at the highly stressed end tips Lubricatable friction washers, also improves response and noise Replaceable nylon slider bars on the guide brackets to reduce friction and noise All spring layers are shot-peened prior to assembly to reduce surface tension and densify material for longer life After assembly, all spring assemblies are "set" to full load and tested for their desired spring rate

Sutits following Leafsprings with with OME greasable shackles 3-426:3-EL102R, 3-EL103R, 3-EL104R, 3-EL126R 3-EL127R & 3-EL128R

The OME Nitrocharger Sport is the further development of the classic OME Nitrocharger. It is also a 2-tube gas pressure shock absorber in low pressure design, but works with three instead of two working valves. In the working piston is now a rebound and a compression valve integrated, as it is otherwise only used in shock absorbers of the 1-tube design. The bottom valve as an additional compression stage valve has been retained. This allows a wider tuning and a better response for more drive comfort with higher safety reserves at the same time.The Nitrocharger Sport series was was introduced in 2006, although the "Sport" designation is not intended to indicate sporty toughness, but only to distinguish it from the "old" Nitrocharger. The Nitrocharger Sport has replaced the Nitrocharger for almost all applications and is used wherever possible in all new developments.Also the "Sport" was developed specifically for the requirements in the 4x4 area and extended in length, wherever it is possible, up to 50mm.Therefore, a use with both the series springs, as well as with the OME height-adjustment springs, with a few exceptions, is possible.The facts in the overview: 35mm working pistons with integrated, multi-stage friction-reducing teflon seals Extra strong, hard chrome plated 18mm piston rod Unique 3-lip seal ring with check valve and generous piston rod guide for excellent top sealing Multi-stage compression valve at the bottom of the working cylinder for optimized progressive response and driveability Stainless polyamide stone guards for the piston rod wherever space permits Durable polyurethane or rubber bushings; for struts, the original parts or OME replacement parts can be used at the top end

For most vehicles OME has different coil springs in different lengths and/ or spring rates in the offer to accommodate the different engines, equipment and especially permanent additional weight due to retrofitted accessories. It is not necessarily the wire gauge and length that matter. The number of windings, the associated pitch and the outer diameter are also used here to achieve the desired tuning. The material used also plays a major role, especially compared to the original spring.To densify and relax the surface, all OME coil springs are shot peened after coiling and then powder coated.Since some vehicles have weight differences from right to left, OME springs are only supplied in pairs, sometimes with springs of different lengths for the right and left sides. In addition, many vehicles have the option of compensating for one-sided sagging with "trim packers".

For most vehicles OME has different coil springs in different lengths and/ or spring rates in the offer to accommodate the different engines, equipment and especially permanent additional weight due to retrofitted accessories. It is not necessarily the wire gauge and length that matter. The number of windings, the associated pitch and the outer diameter are also used here to achieve the desired tuning. The material used also plays a major role, especially compared to the original spring.To densify and relax the surface, all OME coil springs are shot peened after coiling and then powder coated.Since some vehicles have weight differences from right to left, OME springs are only supplied in pairs, sometimes with springs of different lengths for the right and left sides. In addition, many vehicles have the option of compensating for one-sided sagging with "trim packers".

For most vehicles OME has different coil springs in different lengths and/ or spring rates in the offer to accommodate the different engines, equipment and especially permanent additional weight due to retrofitted accessories. It is not necessarily the wire gauge and length that matter. The number of windings, the associated pitch and the outer diameter are also used here to achieve the desired tuning. The material used also plays a major role, especially compared to the original spring.To densify and relax the surface, all OME coil springs are shot peened after coiling and then powder coated.Since some vehicles have weight differences from right to left, OME springs are only supplied in pairs, sometimes with springs of different lengths for the right and left sides. In addition, many vehicles have the option of compensating for one-sided sagging with "trim packers".

For most vehicles OME has different coil springs in different lengths and/ or spring rates in the offer to accommodate the different engines, equipment and especially permanent additional weight due to retrofitted accessories. It is not necessarily the wire gauge and length that matter. The number of windings, the associated pitch and the outer diameter are also used here to achieve the desired tuning. The material used also plays a major role, especially compared to the original spring.To densify and relax the surface, all OME coil springs are shot peened after coiling and then powder coated.Since some vehicles have weight differences from right to left, OME springs are only supplied in pairs, sometimes with springs of different lengths for the right and left sides. In addition, many vehicles have the option of compensating for one-sided sagging with "trim packers".

The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

Suitsvehicles with ond W/o KDSSSThe skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

Fit Models with automatic / manuel gearbox and also Vehicles With / without KDSS.The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

Only fits 5-door models Fit Models with automatic / manuel gearbox and also Vehicles With / without KDSS.For vehicles with KDSS a increased amount of fitting time is required (approx. 2 hours).The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

Does not suit Iglhaut 4x4 KONI Special Series 87...Twin-Tube hydraulic shock absorber without gas. Stepless adjustable when dismanled. Conditionally recommended for Offroad use and vehicles with moderate raised suspension.

Kit includes: 1 x Extensionpiece 1 x Hose Coupling US 1 x Hose Coupling Dust Cap

Mounting Kit allows fittment of ARB-Air-Compressors 2-00051 inside the right rear fender.Included in Kit: Mounting bracket for the ARB Twin Air Compressor ARB Twin Air Compressor Quick connect coupling (outlet) Mounting accessories Air lines Wiring harness Please note:fittment depend on compressor selection. Various additional items are required. (Please see Fitting Instructions) Attention: Does not suit VW Amarok

Also fits the Toyota Hilux MY24 Hybrid 48V.

Also fits the Toyota Hilux MY24 Hybrid 48V.

ARB switch is now one unit and consists of switch unit and upper parrt with new desinged pictogramm.Three Versions available: Diff-Locker FRONT 2-180223SP Diff-Locker REAR 2-180224SP Compressor 2-180222SP

ARB switch is now one unit and consists of switch unit and upper parrt with new desinged pictogramm.Three Versions available: Diff-Locker FRONT 2-180223SP Diff-Locker REAR 2-180224SP Compressor 2-180222SP

Kit allows to mount your Airfilter away from the exposed areas to keep Airfilter dry and clean.Kit contains: Mounting bracket Screwkit 2x 90° Elbow Adapter 2-0740104 1x 1.2m Rubber Hose

will not fit for models with original Toyota Diff.-LockPlease note:Any accessories shown, such as roller bearings, are not included in the scope of delivery.The installation should be carried out by a specialist. If an OE Diff-Locker is present, it cannot be replaced by an ARB Airlocker, or only with increased installation effort.

Use this hose to deliver air from your Compressor throughout your vehicle.

Use this fitting to split air from 1/4 NPT(M) to 1/4 NPT(F) & 1/4 NPT(F)

The Rhino Rack folding antenna mount provides 180 degree rotation for antennas, flags, small LEDs and lights.The mount can be installed on roof racks and Pioneer systems, as well as with a C-channel mount and direct attachment to many popular bullbar brands.The bracket can also be mounted square or parallel.Drilling for antenna: 17mmHeight approx: 86mmThis article can also be combined with the Zwifloc Channel nuts (for Pioneer Platforms and Reconn-Deck bars).NOTE: Additional accessories may be required for installation. Please refer to the Zwifloc compatibility list.

Features: Provides a strong, low-profile attachment point of your rooftop tent Made from strong, powder coated Aluminium Set of four per pack Ratet to max 150kg tents

Features: Weight: 10,5 kg Suitable for mounting aerials, sand flags, and round driving lights (with 39-1780610 ) Mounts between cross beams of BASE Rack Brackets made from strong powder-coated steel Two (2) brackets per kit, includes fasteners for clamp mounting

TRED Pro is the next generation of the already hugely successful TRED off-road recovery device engineered and manufactured in Australia, TRED Pro will outperform any other recovery board in the market. TRED Pro will give you the ability to explore with confidence, without the lack of traction disrupting your journey.TRED Pro is unique patented EXOTRED composite construction ensures that during wheel spin in recovery the ramp / teeth will not suffer instant catastrophic damage as experienced with other leading recovery ramp products.The special polyolefin material blend means TRED Pros can handle high levels of flex, are highly durable and wear resistant. The mix of elasticity and tough rigid design in the main body means that your TRED Pro's maintain a high level of pressure on your tyre, to provide ultimate traction whilst still being able to take the flex of being under the vehicles weight on unstable ground.With a breaking load of 1.1 tonnes per board, at a temperature range of -15°C to +70°C, the TRED Pro recovery boards are an ideal option for your trip!Specifications: Unique two-material construction Patented composite 2-layer nylon design Glass-filled nylon teeth CAD modelled 4X4 tyre patterns

Does not fit Toyota hilux MY24 Hybrid 48V.Mounting kit for AUX Batterie (OPTIMA Yellow Top 4,2LU 14-87500).

The ARB Premium Recovery Glove, perfect for hand protection and keeping your hands clean during recovery situations, general work on your vehicle or around the campsite. Providing general protection in a stylish design, these gloves are a perfect addition to the glovebox or recovery kit. The ARB Recovery Glove provides knuckle protection as well as palm protection with molded rubber impact guards. These gloves use high quality synthetic materials to reduce abrasion and wear, as well as increase comfort on your hand.The cuff is embedded with the ARB Recovery logo and high quality touch tape fastener to keep the glove firmly fitted. Finished in a breathable microfiber and ARB Hi-Vis recovery orange.

When using a tree as an anchor point in a recovery situation, wrapping cable, rope or chain around it can cause damage to both your equipment and the tree. Coming in two practical lengths, ARBs tree trunk protector features 75mm wide webbing which eliminates the risk of ring barking and helps to ensure safe vehicle recovery.

The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

Jeder Snorkel wurde speziell für ein Fahrzeugmodell designed. Das UV-stabile Gehäuse aus Polyethylene sorgt für äußerste Stabilität und hoher Luftdurchfluss für beste Motorleistung. Ein spezielles Design verhindert das Eindringen von Wasser und Staub. Die Befestigungsteile sind aus Edelstahl.

Suits also Invicible ModelsAttention: does not fit GR Sport or either Widetrack Models.

Please note:Any accessories shown, such as roller bearings, are not included in the scope of delivery.The installation should be carried out by a specialist. If an OE Diff-Locker is present, it cannot be replaced by an ARB Airlocker, or only with increased installation effort.

**does not suit OE locker equipped vehicles**Please note:Any accessories shown, such as roller bearings, are not included in the scope of delivery.The installation should be carried out by a specialist. If an OE Diff-Locker is present, it cannot be replaced by an ARB Airlocker, or only with increased installation effort.

Please note:Any accessories shown, such as roller bearings, are not included in the scope of delivery.The installation should be carried out by a specialist. If an OE Diff-Locker is present, it cannot be replaced by an ARB Airlocker, or only with increased installation effort.

ersetzt 2-170105

Provides 100% traction on demand without affecting on road drivability or driveline wear Vastly improved traction means less reliance on momentum, thus reducing the likelihood of vehicle damage and environmental impact Easy, convenient operation allows the user to concentrate on the terrain without leaving the comfort and safety of the drivers seat Ultra durable and extremely strong - only the highest quality materials used in construction Incredibly simple yet effective design that employs minimal moving parts, thereby ensuring maximum reliability Air compressor also provides convenient, reliable source of air for inflating tyres, camping and leisure equipment for modells to '97 with 45mm bearing journal 2pc. 2-160116 bearings are necessaryIn some cases you will need bearings 2-160118 for the 50mm bearing journal and a outside-diameter of 83mm.Please note:Any accessories shown, such as roller bearings, are not included in the scope of delivery.The installation should be carried out by a specialist. If an OE Diff-Locker is present, it cannot be replaced by an ARB Airlocker, or only with increased installation effort.

front axle Provides 100% traction on demand without affecting on road drivability or driveline wear Vastly improved traction means less reliance on momentum, thus reducing the likelihood of vehicle damage and environmental impact Easy, convenient operation allows the user to concentrate on the terrain without leaving the comfort and safety of the drivers seat Ultra durable and extremely strong - only the highest quality materials used in construction Incredibly simple yet effective design that employs minimal moving parts, thereby ensuring maximum reliability Air compressor also provides convenient, reliable source of air for inflating tyres, camping and leisure equipmentPlease note:Any accessories shown, such as roller bearings, are not included in the scope of delivery.The installation should be carried out by a specialist. If an OE Diff-Locker is present, it cannot be replaced by an ARB Airlocker, or only with increased installation effort.

Provides 100% traction on demand without affecting on road drivability or driveline wear Vastly improved traction means less reliance on momentum, thus reducing the likelihood of vehicle damage and environmental impact Easy, convenient operation allows the user to concentrate on the terrain without leaving the comfort and safety of the drivers seat Ultra durable and extremely strong - only the highest quality materials used in construction Incredibly simple yet effective design that employs minimal moving parts, thereby ensuring maximum reliability Air compressor also provides convenient, reliable source of air for inflating tyres, camping and leisure equipmentPlease note:Any accessories shown, such as roller bearings, are not included in the scope of delivery.The installation should be carried out by a specialist. If an OE Diff-Locker is present, it cannot be replaced by an ARB Airlocker, or only with increased installation effort.

This supplementary bracket allows for fitment to vehicle specific compressor mount kits.Features & Benefits: Adapting the new air tank to fit onto the existing holes Powder coated in satin black finish Only required for the following vehicle specifc mounting kits: 2-3515130 Toyota LC J200 {2-3521080} Toyota LC J150 2-3550210 Jeep Wrangler JK 2-3550220 Jeep Gladiator JT & Wrangler JL Mountingplate 2-T001 Y62 Patrol

Die ARB Differenzialdeckel sind aus extrem robusten Gusseisen gefertigt, das härter als Stahl ist. So schützt der Deckel das Differenzial sowie Kegel- und Tellerrad bei heftigen Grundberührungen besonders effektiv, gleichzeitig sorgt die flache Form für eine große Bodenfreiheit unter den Achsen.Darüber hinaus erhöht der ARB-Deckel durch sein am Computer berechnetes Design die Verwindungssteifigkeit der gesamten Achsgeometrie um 1.300 Nm - so laufen Kegel- und Tellerrand vollkommen verwindungsfrei, was ihre Lebensdauer erhöht.Ein integrierter Ölmessstab erlaubt nicht nur die Kontrolle des Pegelstandes, sondern zeigt auch, ob Wasser in das Differenzial eingedrungen ist. Magneten an der Ölablassschraube und am Peilstab fischen schließlich auch noch Metallteile auf und geben frühzeitig Hinweis auf sich ankündigende Schäden oder auf erhöhten Verschleiß.

Suits Diff-Locker with 6mm Airline Productdate: '07/17 onKit contains Fittings and Adapter only. Braided hose have to be ordered separately.

9,3 - 10,3 bar Ducted IP55, 102x190x275mmPlease note:for using in conjunction with ARB Airlocker Mainifold-Kit 2-171503 is recommended.weight 8.8 kg

Please note:Will not suite Models 2019.Note: works with WARN M8000 - XD9000 - 9,5XP - XDC - TABOR 8K - TABOR 10KPlease also note:with wire rope apllication you need also 15-905(E). Attention: If the attachment kit is used in public road traffic, in conjunction with steel cable and roller rope window (unless already excluded by the TÜV certificate), the roller fairlead must be covered by 15-905(E).

Features: Color: anthracite-metallic all moving steel parts and the lever rod are yellow galvanized new 3 in 1 clamp for clamping, splitting wood and an eyelet for hanging a chain

* Kann nicht mit einem Stahlseil verwendet werden !! *

With the TAIO (Taubenreuther-All-In-One) EXT-1 we deliver a extension rope wich perfectly fits to our TAIO EVXT-1. But it also work with every conventional winch rope. It contains all pros of the Non-Metall-Construction with a minimum of injury potential than ever before. Also the lower noise level and less scratchers in your vehicle paintwork argues for the TAIO-System.PROS: feather-light and flexible with a huge breaking load made of Vectran® heat-resisting up to 200°C UV resistant XTR coating lower noise level and a minimum of injury potential(Non-Metal-Construction) no hook, no thimble that can scratch the vehicle paintwork signal colour red for easy recover and all works in bad lighting conditions black protective tubing that also covers the whole last layer for a subtly look deliverd in a attractive netbag Breaking load linear 9000 daN

5m Kevlarvorläufer (gelb, Hitzeschutz) + 25m Kunststoffseil (grau, MBK 90 KN) Die erste (gelbe) Seillage plus 3 Wick- lungen des grauen Seils müssen immer auf der Trommel verbleiben!Das Seil lässt sich nicht mit einem Rollenseilfenster verwenden.

Allows you to connect aftermarket accessories to a battery lead and then disconnect power from a dash mounted switch. Recommended for extra protection

The ARB Pinnacle Camp Table is perfect for cooking and eating on the move. Its durable frame is made from black aluminum with contrasted charcoal crossbars. The generously sized black rugged tabletop provides ample space for your cooker, platters or meals. A key feature of this table is the adjustable legs. Each leg can be independently adjusted to allow for stability on uneven surfaces, and the table height can be adjusted anywhere from 79cm to 99cm. There are built in brackets on the frame which hold the included mesh basket for added storage. The table packs away into a compact 600D polyester carry bag featuring a built-in internal divider separating the tabletop from the frame. Features: Compact aluminium camp table Independently adjustable legs to allow for use on uneven surfaces Height can be increased from 79cm to 99cm Large tabletop (114cm x 70cm) Convenient storage basket under tabletop Sturdy carry bag with built-in internal divider

The REDARC Smart Start SBI212 is a microprocessor-controlled battery isolator used in dual battery systems as a solenoid priority system. It will protect the start battery from excessive discharge, whilst allowing the auxiliary battery to supply non-essential loads. The SBI212 provides 12 volt DC incorporating 200A of continuous ratings.The battery isolator is primarily used in 4WD and commercial vehicles and incorporates electronic components that will prevent the solenoid from generating high voltage transients. It is better than a diode battery isolator due to the voltage drop associated with diode type isolation. t features a low standby current draw and sophisticated fault detection and LED indication of operation to warn the user of faults including over-voltage, voltage drop and excessive current draw conditions.It can also be used in conjunction with a battery charger (BCDC) to start the starter battery from the auxiliary battery if the starter battery fails. Features: Prevents your auxiliary battery from drains the starter battery Suitable for tough conditions Connecting batteries to operate a winch Jump start in the case of starter battery failure

The assembly is only approved for the Rhino-Rack Pioneer platform & Rhino-Rack Reconn bars.Please refer to following items to select appropriate size: Pioneer Set: 50-10JA9302Reconn Set: 50-10JA9305

The Rhino-Rack Cargo Case is a heavy duty storage box perfect for when you need to store anything from wet gear to tools on your vehicle roof or tub. Simply throw your gear in or use the included diced foam insert to mold around sensitive equipment.If mounting to a Rhino-Rack platform, each case comes with a template so you can drill out mounting holes in the exact location. The case is mounted using the quick release Zwifloc channel hardware, and the IP67 water proof rating is maintained with the OEM approved gasketing washers. Features: Waterproof, shock proof and dustproof 94 litres of space Pressure equalisation valve to prevent altitude deformation Padlock holes to protect your gear Includes foam Contents inlcuded: 94L cargo case, foam inserts mounting hardware and tools. Dimensions: Dimensions (external) : 1187 x 525.5 x 202.5mm Dimensions (internal) : 1120 x 465 x 180mm Capacity : 94L Weight : 8,9kg

Thread Size: M6

Platform weight: 26,5kgRhino Rack's strongest and most versatile roof rack ever, yet it still boasts up to a 60% reduction in drag, a 20% reduction in weight, and 25% more usable channels, enabling every inch of the platform to be ustilised for mounting accessories. Quieter and lighter than ever, the unique alloy components and scuff-resistant coating ensure there's no compromise in quality, allowing you load more than ever before without sacrificing your gear for adventure. With integrated capabilities, additional east/west mounting channels, and the most comprehensive ecosystem of accessories on the market, the Pioneer 6 Platform makes you the Pioneer of your adventure. Except for the outer C-Channels, the installation of accessories is only possible with Zwifloc Channel NutsFeatures & Data: Up to 60% reduction in drag from its predecessor Stronger alloys that maintain strength but reduce weight by 20% too No channel apertures make 100% of the platform usable for mounting accessories Improved performance with up to 25% more usable channels harder coating to reduce damage and scuffs East/West mounting channels for more mounting options than ever before Integrated wiring capabilities within all extrusions Detachable wind fairing inserts in leading-edge further enhance drag reduction

Kit contains: 1x Reconn Platform 7x Recoon-Deck Bars RDB120 1200mm Fits the Toyota Land Cruiser J250 and Lexus GX550.Features & Data: Product weight: 33 Kg Made from powder coated aluminium and corrosion resistant hardware No drilling required build in wind fairing Dimension: 2414x1228x71mm (LxWxH) ATTENTION - Please note!If the vehicle has the panorama sunroof it can no longer be fully opened. It can only be moved into tilt position. Attempting to open it fully can cause severe damage to the vehicle!

Kit contains: 1 x Backbone Mounting System 1 x Pioneer 6 Platform 1 x RTS Tracks RTS556 for mounting it is necessary to drill in the roof.Fits the Toyota Hilux Double Cab 10/2015 onRhino Rack's strongest and most versatile roof rack ever, yet it still boasts up to a 60% reduction in drag, a 20% reduction in weight, and 25% more usable channels, enabling every inch of the platform to be ustilised for mounting accessories. Quieter and lighter than ever, the unique alloy components and scuff-resistant coating ensure there's no compromise in quality, allowing you load more than ever before without sacrificing your gear for adventure. With integrated capabilities, additional east/west mounting channels, and the most comprehensive ecosystem of accessories on the market, the Pioneer 6 Platform makes you the Pioneer of your adventure. Except for the outer C-Channels, the installation of accessories is only possible with Zwifloc Channel NutsFeatures & Data: Up to 60% reduction in drag from its predecessor Stronger alloys that maintain strength but reduce weight by 20% too No channel apertures make 100% of the platform usable for mounting accessories Improved performance with up to 25% more usable channels harder coating to reduce damage and scuffs East/West mounting channels for more mounting options than ever before Integrated wiring capabilities within all extrusions Detachable wind fairing inserts in leading-edge further enhance drag reduction

Kit contains: 1 x Pioneer 6 Platform 1 x RX100 Legkit Fits the following vehicles: VW Amarok Double Cab with Roof Rails '23 on Ford Ranger Wildtrak Double Cab with Roof Rails '23 on Ford Ranger Wildtrak Double Cab with Roof Rails 2012 - 2022 Dacia Duster '25 on, with raised Rails Nissan Navara NP300 Dual Cab with Roof Rails '15 on Great Wall Steed with Roof Rails 10/2017 on Mercedes X-Class with Roof Rails 04/2018 on Cupra Formentor with raised rails Seat Ateca with raised rails GWM Cannon Alpha with raised rails Rhino Rack's strongest and most versatile roof rack ever, yet it still boasts up to a 60% reduction in drag, a 20% reduction in weight, and 25% more usable channels, enabling every inch of the platform to be ustilised for mounting accessories. Quieter and lighter than ever, the unique alloy components and scuff-resistant coating ensure there's no compromise in quality, allowing you load more than ever before without sacrificing your gear for adventure. With integrated capabilities, additional east/west mounting channels, and the most comprehensive ecosystem of accessories on the market, the Pioneer 6 Platform makes you the Pioneer of your adventure. Except for the outer C-Channels, the installation of accessories is only possible with Zwifloc Channel NutsFeatures & Data: Up to 60% reduction in drag from its predecessor Stronger alloys that maintain strength but reduce weight by 20% too No channel apertures make 100% of the platform usable for mounting accessories Improved performance with up to 25% more usable channels harder coating to reduce damage and scuffs East/West mounting channels for more mounting options than ever before Integrated wiring capabilities within all extrusions Detachable wind fairing inserts in leading-edge further enhance drag reduction The Rhino Rack RX Leg-kit is designed specifically for use with roofs that feature raised rails. The RX Leg provides a seamless transition between product and vehicle, for a sleek look that doesn't compromise functionality.Features: Quick and easy installation Compatible with Rhino-Rack Vortex Bars and PioneerNG Platforms Easy access to Vortex-Bar channel for quick accessory installation

Clutch will be deliverd without FlywheelFor Ford Ranger '11 - '23 PXDoes not suit 2.0l Models!Great driveability. Advantages of perfor mance friction material and higher torqu e centre.Suited for Xtreme conditions and usage.Suited for everyday use and off-road con ditions.

provides a flat floor to the side wall of the vehicle and accessible storage space underneath. Suitable to RD + RDRF moduls onlyPlease note:Suits only "Basic" models. On all other models side floor kit needs to be trimmed.

Suits following drawers from 2010 on: 37-RD1355 & 37-RD945Specs: Stainless Steel 499mm (L) x 442mm (W) x 19mm (H) Surface 8kg weight limit Not compatible with Roller Floor Modules

modules can be mounted individually, side by side and vertical. lockable, covered with UV stable carpet rated to carry 100 kg spread evenly throughout the drawer. Attention: the drawers are universal parts. Vehicle-specific covers including installation kit and instructions are available for some vehicles. For models without a suitable side cover, installation is possible with increased effort, so we recommend installation by an experienced mechanic. Please refer to the data sheet and the application list. The modular Outback Solutions range can be customized to your individual needs. Thanks to the modular concept, individual components can be put together to form a whole, e.g. stacked on top of each other and sitting next to each other, giving you the option of putting together a complete system to suit your needs. The drawers can be loaded with up to 100kg, the pull-outs up to 75kg. Three different types: Drawers Drawers with Rolerfloor Roller floors Features: Key lockable, push-pull slam shut latches for ease of use and maximum security Long lasting, UV stable commercial carpet designed to complement modern vehicle interiors Fully Sealed, Dust and water resistant bearings for superior longevity working in harsh environments Folded stainless steel bearing runners for ultra-smooth drawer and slide operation Self-locking anti roll back system locks into place at full extension, this holds the drawer from rolling closed even on inclines Modular units allow greater flexibility if needs change in the future

modules can be mounted individually, side by side and vertical. lockable, covered with UV stable carpet rated to carry 100 kg spread evenly throughout the drawer. Attention: the drawers are universal parts. Vehicle-specific covers including installation kit and instructions are available for some vehicles. For models without a suitable side cover, installation is possible with increased effort, so we recommend installation by an experienced mechanic. Please refer to the data sheet and the application list. The modular Outback Solutions range can be customized to your individual needs. Thanks to the modular concept, individual components can be put together to form a whole, e.g. stacked on top of each other and sitting next to each other, giving you the option of putting together a complete system to suit your needs. The drawers can be loaded with up to 100kg, the pull-outs up to 75kg. Three different types: Drawers Drawers with Rolerfloor Roller floors Features: Key lockable, push-pull slam shut latches for ease of use and maximum security Long lasting, UV stable commercial carpet designed to complement modern vehicle interiors Fully Sealed, Dust and water resistant bearings for superior longevity working in harsh environments Folded stainless steel bearing runners for ultra-smooth drawer and slide operation Self-locking anti roll back system locks into place at full extension, this holds the drawer from rolling closed even on inclines Modular units allow greater flexibility if needs change in the future

The OSRAM Wiring Harness was develeoped to support the installation of the OSRAM LEDriving driving and working lights. Easy Installation For easy installation of OSRAM LEDriving driving and working lightsIntegrated OnOff switch For installation in the vehicles cabin switch the OSRAM LEDriving working lights on or off as requiredConnection of two light sources Wire harness suitable for the installation of two light sources with one lighting function of the OSRAM LEDriving driving and working lights for 12 V vehiclesAlso available for one light source: 36-4LEDDLACC101.

TRED Pro is the next generation of the already hugely successful TRED off-road recovery device engineered and manufactured in Australia, TRED Pro will outperform any other recovery board in the market. TRED Pro will give you the ability to explore with confidence, without the lack of traction disrupting your journey.TRED Pro is unique patented EXOTRED composite construction ensures that during wheel spin in recovery the ramp / teeth will not suffer instant catastrophic damage as experienced with other leading recovery ramp products.The special polyolefin material blend means TRED Pros can handle high levels of flex, are highly durable and wear resistant. The mix of elasticity and tough rigid design in the main body means that your TRED Pro's maintain a high level of pressure on your tyre, to provide ultimate traction whilst still being able to take the flex of being under the vehicles weight on unstable ground.With a breaking load of 1.1 tonnes per board, at a temperature range of -15°C to +70°C, the TRED Pro recovery boards are an ideal option for your trip!Specifications: Unique two-material construction Patented composite 2-layer nylon design Glass-filled nylon teeth CAD modelled 4X4 tyre patterns

Incl. 2x Osram SX180-SPDoes NOT fit in combination with a winch mounting carrier.Vehicle specific headlight kit that not only provides great light output, but also adds a nice accent without disturbing the vehicle design.Kit includes: Vehicle specific mounting carrier (incl. Fitting Instruction) 2x OSRAM Spot Headlights 36-3LEDDL105-SP 1x Universal Cable Harness 2-3500520The Universal Cable harness enable a integration to the Vehicle driving beam. For some vehicles it may have to be reworked. We recommend a professional Workshop. Also a switch is included to make a separate circuit. But this soulution is not StVZO compatible.

The ARB Hydraulic Jack is an investment and should be securely mountet in or on the vehicle.We have tried to design a bracket that offers a wide variety of mounting options on roof racks and other systems by using a hole pattern that is as universal as possible.The two holes on the closure allow the attachment of a shackle closure or similar (not included in delivery).

Specifically designed to stretch under load for maximum performance, an ARB snatch strap is a very effective method of extracting a bogged or immobilised 4WD when a second vehicle is present. ARB snatch straps are elastic, the benefits of which are twofold. Firstly, the kinetic energy generated by the elasticity actually aids the recovery itself, and secondly, the elasticity greatly reduces the likelihood of vehicle damage during recovery. The weight of each 4x4 and the weighted force of whatever caused the immobilisation puts enormous strain on the points where the strap is attached, and without some elasticity, there is a substantial risk of damaging the vehicle.

Designed for applications where an angled chuck is required such as small wheels and motorcycle rims, this small air chuck can be fitted to ARB compressor lines with the US standard fitting, or the fitting can be removed and retrofitted with any air fitting using 1/4 NPT threadFeatures: Compatible with ARB Air Compressors Clip on chuck Heavy duty nickel plated brass and steel construction 1/4 NPT US standard male air fitting Internal air shut off valve

Features: 3x shower head mount locations; roof, backwall Velcro, back wall hooks Ample storage - 5x pockets total Integrated roof with centre bow 200 GSM, silver coated canvas Adjustable height. Pegs includes Integrated dual colour lighting options (warm & cool LED) Optional roof or wall lighting Dimmable via USB-C controller Integrated heavy duty polyethylene floor with corner drain hose Toilet roll & accessories holder Private & sheltered space while traveling Integrated towel holder 2x general wall hooks Can be used with or without roll out roof Waterproof & UV protected 850GSM heavy duty PVC zippable storage bagBatch-No. Tip: Note: The awning bag is weather-resistant, not waterproof. Please check regularly to ensure no water has collected inside the bag.ARB only accept eventual warranty claims only in conjuction with regarding Batch No wich is placed on the shipping box. Usually the box will not be kept and the number gets lost. To avoid any further troubles we highly recommend to note the number on the small patch located on one of the outer corners of the awning wich is labelled with Batch-No.

All packed up into one handy kit, the Awning & Light Kit includes both the ARB Awning and an LED light strip in the awning roof to keep your camp shelter and lighting solutions together, ready for your next adventure.Featuring anodised height adjustable telescopic legs and thick reinforced aluminium extrusions, the ARB awning provides fast and reliable shade and protection from the elements.The LED light strip provides up to 1200 lumens, with a choice of two different colour modes (cool white or amber) and dimmer switch, all powered via a fused cig socket plug.Features: Length Telescope Poles: 218 cm (= max. mounting Height at vehicle) Height Awning Mounting Track: 63mm Distance between C-Channel: 50mm integrated LED Strip (max. 1200 lumens) 2 colour modes: Cool-White & AmberScope of delivery:Mounting parts*, pegs, tension ropes, telescopic poles.*Mounting parts: For ARB awnings, only one set of screws is supplied, which only works in conjunction with the ARB roof rack (very minimalist).Batch-No. Tip: Note: The awning bag is weather-resistant, not waterproof. Please check regularly to ensure no water has collected inside the bag.ARB only accept eventual warranty claims only in conjuction with regarding Batch No wich is placed on the shipping box. Usually the box will not be kept and the number gets lost. To avoid any further troubles we highly recommend to note the number on the small patch located on one of the outer corners of the awning wich is labelled with Batch-No.

Designed to function as a fully enclosed room or mosquito net, the new ARB Deluxe awning room with floor provides protection from the weather, insects and provides additional privacy. Easy and quick to set up the ARB Deluxe awning room can be used with 2000mm model awnings and features a durable waterproof floor and its own separate ceiling to help keep you cooler.All main wall panels incorporate zipper operated two way solid and mesh access and to accommodate changing weather conditions. Features: Rear wall can be unzipped to provide access to the vehicle rear door or canopy side window Mesh pocket removable ladder organiser Two zippered ports located in the top corners for power cable access Power cord guides in roof corners keep cables and wires tidy and safe Can accommodate awning heights from 1.9m to 2.1m from ground level Cross flow ventilated mesh roof Fine midge-proof mesh side panels Heavy duty polyethylene waterproof floor Nylon stuff sack, 2 guy ropes and 6 pegs included Weight: 8kg

Please note:Despite the mounting position, it is still possible to fit a snorkelfor batteries up to a maximum size of 325mm(L) x 180mm(W) x 185mm(H)The REDARC BCDC1225D under bonnet Battery Charger is a 12V 25A DC to DC battery charger, capable in engine bay installations.Featuring a Maximum Power Point Tracking (MPPT) solar regulator, the BCDC1225D will charge from both solar and the alternator simultaneously. And, with built-in Green Power Priority it will select solar charging first, meaning less load on the alternator.Suitable for 12 or 24-volt vehicle systems, the unit will also work with either standard or variable/smart alternators.The BCDC1225D features charging profiles making the unit suitable for charging AGM, Gel, Standard Lead Acid, Calcium and LiFePO4 batteries. Features: Separate DC and solar charging inputs Maximises the performance and life of your auxiliary battery Simultaneous DC and solar charging with Green Power Priority Suits 12V/24V standard and variable voltage/smart alternators Suitable for AGM, GEL, standard lead acid, calcium and Lithium (LiFePO4) batteriesIf you attach additional consumers such as coolers, winches, headlights, etc. to your vehicle, it is very often necessary to install a second battery. But where is the space for it? ARB has developed an mounting kit for pickup trucks.Made of galvanized, powder coated 3mm steel.Suitable for OPTIMA 4.2 batteries.

Kit contains: 1 x ARB quick-connect tyre inflation chuck 1 x Tyre bead seating fitting 1 x inflation adaptor fitting

There's little doubt that the traditional farm jack is a handy piece of equipment to have when you're driving off road. You can use it to move your vehicle out of awkward situations, lifting vehicles to fill in voids beneath the tires or even as a bead breaker when you have to make a tire repair.But, as we all know, farm jacks can be dangerous. They're inherently unstable and there are countless YouTube videos of users getting injured from a rogue handle or getting their hands caught between the handle and the body of the jack.With this problem in mind, ARB's team of engineers was determined to come up with a better solution to the unsafe farm jack problem. The focus was to design a safer and easier mechanical jack whilst being lighter and more compact.Features: 2-stage drain function:Standard = uniform, controlled and stepless;Emergency = immediate opening of the valve to completely drain the jack Wide, rotatable leg provides a secure base on almost any surface Ergonomic handle Overload protection to maintain max. working load of 2,000 kg Rubber sleeve to protect the bumper

Suits Hilift and ARB Jack

Introduced at Automechanika in 2014, the OME BP51 remains the top product in the OME shock absorber range. With its innovative technology and outstanding performance, it sets benchmarks in its class. By combining the advantages of twin-tube, monotube, and bypass shock absorber designs while eliminating their disadvantages, it achieves exceptional performance and unique capabilities. Maximum piston travel and length through relocation of the separator piston and gas reservoir into a separate remote canister. Very progressive and broad tuning range by utilizing the large 51mm piston in combination with bypass channels. Only the integration of bypasses into the dual-wall body makes it possible to use it as a compact coilover. The bypasses also serve as hydraulic end stops, reducing stress on the original rubber bump stops and piston rod. Only the dual-wall, 4mm thick housing ensures perfect protection of the cylinder bore from external impacts. The use of high-strength aluminum with excellent heat dissipation and extra- large oil volume provides perfect thermal stability. 10-stage adjustability in both directions, independently and while installed, allows for individual tuning at any time to suit the driver and specific conditions. Uncompromising use of premium components such as hard-anodized 6061 T6 aerospace- grade aluminum, Teflon-steel braided lines, and uniball bearings in coilovers ensures long service life. Whether you value high ride comfort in an empty vehicle, enduring performance on long trails with a fully loaded expedition rig, or maximum flexibility with the BP51, you always make the best choice.

Introduced at Automechanika in 2014, the OME BP51 remains the top product in the OME shock absorber range. With its innovative technology and outstanding performance, it sets benchmarks in its class. By combining the advantages of twin-tube, monotube, and bypass shock absorber designs while eliminating their disadvantages, it achieves exceptional performance and unique capabilities. Maximum piston travel and length through relocation of the separator piston and gas reservoir into a separate remote canister. Very progressive and broad tuning range by utilizing the large 51mm piston in combination with bypass channels. Only the integration of bypasses into the dual-wall body makes it possible to use it as a compact coilover. The bypasses also serve as hydraulic end stops, reducing stress on the original rubber bump stops and piston rod. Only the dual-wall, 4mm thick housing ensures perfect protection of the cylinder bore from external impacts. The use of high-strength aluminum with excellent heat dissipation and extra- large oil volume provides perfect thermal stability. 10-stage adjustability in both directions, independently and while installed, allows for individual tuning at any time to suit the driver and specific conditions. Uncompromising use of premium components such as hard-anodized 6061 T6 aerospace- grade aluminum, Teflon-steel braided lines, and uniball bearings in coilovers ensures long service life. Whether you value high ride comfort in an empty vehicle, enduring performance on long trails with a fully loaded expedition rig, or maximum flexibility with the BP51, you always make the best choice.

Trimpacker are sold as piece.

ARB/Old Man Emu Edition

Does not fit in combination with Nitrocharger Plus shock absorbers.

Greasable Shakle pins (2 pcs) for OME Leafspring in conj. with 3-8118

Greasable Shakle pins (2 pcs) for OME Leafspring in Conjunction with OME Bushes for following vehicles: TOYOTA HILUX VIGO '05 - '15OME Bush Kit (1 Kit per Leafspring) 3-898 Bush KitOME Shackle Kit (1 Kit for 2 Springs) 3-419 greasable Shackle Kit TOYOTA HILUX REVO '16 onOME Bush Kit (1 Kit per Leafspring) 3-898 Bush KitOME Shackle Kit (1 Kit for 2 Springs)3-431 greasable Shackle Kit ISUZU D-MAX '12-'20OME Bush Kit (1 Kit per Leafspring) 3-898 Bush KitOME Shackle Kit (1 Kit for 2 Springs) 3-419 greasable Shackle Kit ISUZU D-MAX '21 onOME Bush Kit (1 Kit per Leafspring) 3-8119 Bush Kit OME Shackle Kit (1 Kit for 2 Springs) 3-436 greasable Shackle Kit

Does not fit with option: H12 hot water auxiliary heaterThe skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

Does not fit vehicles that have been lifted with a "body lift" (spacers between the axle carrier and the body), as, for example, in the case of the Delta suspension.Features: Suits also Taubenreutehr winch carrier 16-60220NW, 16-60220-V8500, 16-60220-VR8S, 16-60220-VR10S, 16-60220-M8000 & 16-60220-XD9000 The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

Suits 2,0L / 3,0L automatic and manual transmission. Also fits Ranger Raptor 11/22 on diesel models.The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

The front skid plate is also compatible with ARB Recovery Points.Part numbers2-2840060 & 2-2840070The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

Please note:will not suit ARB Rockslider 2-4424010.The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

The Bushranger Plugga III Tyre Repair Kit is the perfect partner for your compressor when heading off-road. An essential kit for every vehicle both on on and off road. Repairs punctures caused by nails, spikes or other road debris, without having to remove the tyre from the wheel.Kit includes: Reaming tool Plug insertion needle with metal stop Replacement insertion needle Allen key Long nose pliers Plug trimming knife Pencil tyre gauge Pot of plug lubricant Tyre valve replacement cores Tyre valve repair tool 20 Repair plugs Storage case

Only suits EU-models.

Incorporating new in house engineered and designed optics partnered with OSRAM LED technology and styling updates, the ARB Intensity Solis has pushed the limits of driving light technology once again and produced a uniquely designed, feature packed and highly capable driving light and now in small version and ready for on road use in European countries.The 21 LEDs are made up of 15 x 4W and 6 x 5W which deliver amazing distance down the road for its size with a beam pattern that is perfected for a wide range of driving conditions.Thermal management for controlling the temperature created by LEDs has always been a premium feature of the ARB Intensity. Never compromising on quality, intelligent active thermal management for the light is included and has been optimised by our engineers, so allows the efficient dissipation of heat from the light housing to keep the LEDs running at maximum performance. ARB Intensity lights are designed to maximise the output in all driving conditions and provide increased life expectancy of the light compared with cheaper lighting options in the market.The ARB Intensity Solis 21 LED include a unique digital dimmer control. Pre-set brightness settings have been hard programmed into the controller to enhance your driving experience. Using modern styling lines and designs, the controller has been kept as small as possible to provide a seamless fit and finish to modern dash boards.The off-road mode allows the lights to be used to their full potential, by allowing access to the two highest settings; these two settings will also illuminate on the touchpad in a red colour to further alert the driver they are not in the on-road mode setting. To gain access to the off-road system, you have to activate it separatly. Important: The two brightest intensity settings are not UNECE R112/R149 compliant for on-road use and should only be used when off road. To revert to on-road mode, turn off the off-roade mode. DO NOT activate off-road mode while operating on public roads.The overall design with interchangeable bezels (black/ reed) included with the light that can be changed easily by the customer. Colours featured are the iconic ARB red and also black for that stealth look on the front of the vehicle.The high pressure die cast aluminium mount which includes security hardware provides a variety of mounting positions and fitment to a greater number of bull bars on the market. They can also be mounted hanging.Kit includes: 2x Solis Driving Light 2x Cover (clear) also available in amber or black 2x Mounting bracket 2x Mounting Hardware Kit 1x Wiring loom incl. Touchpad 1x Bezel red1x Bezel blackFeatures:On-Road Mode: UNECE R149 compliant Power Draw: 36W Current Draw: 2,7 Amps at 13,2V Effective Lumens: 2.700 LumenOff-Road Mode: not UNECE R149 compliant Power Draw: 82W Current Draw: 6,2 Amps at 13,2V Effective Lumens: 6.00 LumenTouchpad: Up- and Down Button 5 pre-set Stufen5%, 25%, 50%: On-Road75%, 100%: Off-Road only Silicone sleeved for durability and protection Multi coloured indicators (white/ red) Intuitive control and touch Dimension (in mm): 58x10x25 (LxDxH)

Togehter with 2-SA290CRK & 2-SA290FLK the Stealthbar suits up to 6 Front Sensors. Does not fit XL/XLS Models.Togehter with 2-SA290RHK & 2-SA290FLK the Stealthbar suits up to 6 Front Senors. Does not fit XL/Wildtrack Models.

Can not be retrofitted.

Also fits the Toyota Hilux MY24 Hybrid 48V. Please note: Suits only wide body models '21 on with Parking sensors. Models pre '21 with Parking Sensors not tested yet. Including TÜV-CertificationWhen installing a winch on Hilux model 2024 on, one of these guard plates (16-0523, 16-05240, 16-0512) is needed, otherwise the rope will be in contact with the A/C cable.High strength synthetic bumper specially designed for the Toyota Hilux Revo. Winch bumper with a wide range of options and accessories.Please Note: The bumper comes without parking sensors, fog lights, license plate holder or other parts that may be installed in the original bumper. In the Accessories section you willfind mounting kits, wiring and a selection of different lights to help with conversion or new installationPlease Note:Fit and function on vehicles with 360° camera could not be verified yet.Under the section Documents you will find an assembly instruction and a data sheet, which describes a more detailed assignment of the accessories.

Required when fitting All in 1 Light kit on Stealthbar 2-SA190BL190 & 2-SA190BL191.

The ARB Intensity IQ has been developed from the ground up, with performance front of mind, whilst delivering a design that complements modern vehicle styling and bar work. With a subtle introduction of ARB red within the light, the free-form clear front lens, bezel-less design and CNC machined ARB logo provide a modern, classy and premium new look. Packed with unique features, the Intensity IQ sets a new level of driving light design and usability.A unique 4-optic design (Super Spot, Spot, Flood and Midrange) is employed to provide virtually an unlimited choice of light beams to suit any road condition. The Super Spot and Spot optics, based on free-form reflector technology, produce an even spot beam for extended distance illumination. The Flood optic has a specially designed lens to maximise the light spread for excellent foreground visibility. The Midrange optics employ a conventional parabolic reflector to illuminate the midrange area. Furthermore, the beam pattern of each of the two lights can be independently adjusted so you could run, for example, one focused on spot and one focused on flood. INNOVATIVE MOUNTING BRACKET Intelligent thermal management maximises light output in all driving conditions and provides outstanding LED life expectancy. Cooling is maximised via the die cast aluminium body which acts as a massive heat sink. An innovative, sleek new mounting bracket design not only allows adjustment of light beam angle, but also provides additional mass and surface for cooling. INNOVATIVE MOUNTING BRACKET Turn on and off the driving lights Provide 8 selectable and customisable preset light beams Disable courtesy light function (delayed light off after ignition off) Turn on/off Euro mode (light beam complying UNECE R149) Activate/deactivate demo mode Restore factory settingsThe switch is customisable via the ARB Intensity IQ app (available via the App Store for iOS and Google Play for Android), which allows users to: Turn on and off the driving lights Adjust the intensity of each row of optics on each individual light (or both at once) to create your ideal beam pattern Setup the fade in/out feature Turn on/off courtesy feature and adjust timer Activate the work light function (lights on without high beam on) Select a light network to connect to (for example if you have 2 different vehicles, each with IQ lights) Save or undo the change Turn on and off the Euro mode Set the onboard switch response time Restore factory settings

Please note:Does not suit VW Amarok 2023 & PHEVFord Ranger models

Jeder Snorkel wurde speziell für ein Fahrzeugmodell designed. Das UV-stabile Gehäuse aus Polyethylene sorgt für äußerste Stabilität und hoher Luftdurchfluss für beste Motorleistung. Ein spezielles Design verhindert das Eindringen von Wasser und Staub. Die Befestigungsteile sind aus Edelstahl.

This article is supplied without parts certificate or test report. By the assembly the operating license of the vehicle expires if not immediately a, according to StVZO §19, Abs. 2 in connection with §21 prescribed test is accomplished. After the technical modification has been carried out, the vehicle must therefore be immediately presented to an officially recognized expert at a technical inspection center.However, the respective expert/inspector is free to refuse registration!In addition, all parts of the company Long Ranger Tanks, ARB, OME, etc. are accompanied exclusively by English assembly instructions. Please note: The ARAMAY Snorkel are not designed for standard motor controls! These snorkels were specially developed for engines that have been upgraded by increasing power (larger turbo, additional intercooler, modified engine control).

Fits XL, XLS, XLT, Sport & Wildtrak models. Also fits AdBlue models.Installation Time Tank: ca. 8h

Also fits the Toyota Hilux MY24 Hybrid 48V.

Fits only in addition with 2-4414710Also fits the Toyota Hilux MY24 Hybrid 48V.

Mounting Kit allows you to fit ARB Air-Compressors-Models(2-00010, 2-00011, 2-00051). Located directly under the Driver or passenger Seat.Please use 2-0740111 for Air-coupling applicationIf the Airtank 2-171507 is used, the Adapter Bracket 2-0830003 is needed.

Mounting Kit allows fittment of ARB-Air-Compressors-Models. An additional Universal bracket willalso allow the fitment of the 4L ARB AirTank.

Please note:Any accessories shown, such as roller bearings, are not included in the scope of delivery.The installation should be carried out by a specialist. If an OE Diff-Locker is present, it cannot be replaced by an ARB Airlocker, or only with increased installation effort.

Please note:Any accessories shown, such as roller bearings, are not included in the scope of delivery.The installation should be carried out by a specialist. If an OE Diff-Locker is present, it cannot be replaced by an ARB Airlocker, or only with increased installation effort.

Please note:Any accessories shown, such as roller bearings, are not included in the scope of delivery.The installation should be carried out by a specialist. If an OE Diff-Locker is present, it cannot be replaced by an ARB Airlocker, or only with increased installation effort.

ARB switch is now one unit and consists of switch unit and upper parrt with new desinged pictogramm.Three Versions available: Diff-Locker FRONT 2-180223SP Diff-Locker REAR 2-180224SP Compressor 2-180222SP

Please note:Any accessories shown, such as roller bearings, are not included in the scope of delivery.The installation should be carried out by a specialist. If an OE Diff-Locker is present, it cannot be replaced by an ARB Airlocker, or only with increased installation effort.

Please note:Any accessories shown, such as roller bearings, are not included in the scope of delivery.The installation should be carried out by a specialist. If an OE Diff-Locker is present, it cannot be replaced by an ARB Airlocker, or only with increased installation effort.

VIN numbers starting with: VSK........Please note:Any accessories shown, such as roller bearings, are not included in the scope of delivery.The installation should be carried out by a specialist. If an OE Diff-Locker is present, it cannot be replaced by an ARB Airlocker, or only with increased installation effort.

Please note:Any accessories shown, such as roller bearings, are not included in the scope of delivery.The installation should be carried out by a specialist. If an OE Diff-Locker is present, it cannot be replaced by an ARB Airlocker, or only with increased installation effort.

ARB Air-Locker, for front and rear axle 3/93+, 24 teeth. Provides 100% traction on demand without affecting on-road drivability or driveline wear.Vastly improved traction means less reliance on momentum, thus reducing the likelihood of vehicle damage and environmental impact.Easy, convenient operation allows the user to concentrate on the terrain without leaving the comfort and safety of the driver's seat.Ultra durable and extremely strong - only the highest quality materials are used in construction.Incredibly simple yet effective design that employs minimal moving parts, thereby ensuring maximum reliability.Air compressor also provides convenient, reliable source of air for inflating tyres, camping and leisure equipment.Please note:Any accessories shown, such as roller bearings, are not included in the scope of delivery.The installation should be carried out by a specialist. If an OE Diff-Locker is present, it cannot be replaced by an ARB Airlocker, or only with increased installation effort.

Please note: When mounting, it is essential to use the Simmerring: {2-90311-T0015} is required, as it cannot be removed undamaged. But please be aware that this number may can change due model. Please Note: For Air Lockers for Toyota Landcruiser J250 2-081837SP Seal Housing must be ordered separately.Provides 100% traction on demand without affecting on road drivability or driveline wear Vastly improved traction means less reliance on momentum, thus reducing the likelihood of vehicle damage and environmental impact Easy, convenient operation allows the user to concentrate on the terrain without leaving the comfort and safety of the drivers seat Ultra durable and extremely strong - only the highest quality materials used in construction Incredibly simple yet effective design that employs minimal moving parts, thereby ensuring maximum reliability Air compressor also provides convenient, reliable source of air for inflating tyres, camping and leisure equipmentPlease note:Any accessories shown, such as roller bearings, are not included in the scope of delivery.The installation should be carried out by a specialist. If an OE Diff-Locker is present, it cannot be replaced by an ARB Airlocker, or only with increased installation effort.

Mounting Kit allows fittment of ARB-Air-Compressors-Models (2-00061, 2-00010, 2-00051, 2-00011 & 2-00081)in the Engine Bay

Information Battery: Type: Rechargeable battery Chemical System: Lithium-Ion/ Lithium-PolymerThe engineers at ARB have been hard at work creating something new and unique to the market. On the back of the ever-growing success of the highly advanced LINX Vehicle Accessory Interface, we are proud to introduce the newest product from the team, ARB Pressure Control. Employing the same unmatched ARB proprietary technology and learnings from over 3 years of in-field use, this premium product now provides more ARB Air Compressor customers with the option to use convenient, accurate nd unmatched air pressure control. More so, this incredible functionality is conveniently controlled at your fingertips by a smartphone app!Features: Utilises a smartphone app and pressure control regulator valve to conveniently inflate and deflate tyres, balls, air mattresses, bike tyres and more View the current pressure in your tyres Set the desired target pressure using four customisable pre-set modes of your choice Set the maximum system pressure Choose your own units of measurement from kPa, bar, psi Receive audible and vibration alerts to indicate when desired pressure has been achieved Set system settings such as only allowing pressure control to operate if he engine is running Initiate a recalibration of the pressure sensor via the app for unmatched accuracy View the current voltage of your electrical system IP rated Pressure Control Module and Wiring Harness safe for engine bay mountingSet includes: Pressure Control Module Pressure Regulating Valve Pressure Transducer Wiring Harness Mounting Bracket Installation InstructionsCompatibility: Suits ARB Air Compressors: CKSA12, CKMA12, CKMTA12 Suits 12-volt electrical charging systems only Smartphone application suits Android and iOS compatible devices

ARB's differential cover has been secifically engineered to protect the differential and ring & pinion set from any off-road hazards.- High tensile nodular iron structure protects the differential and ring & pinion set.- Computer optimised cross brace design increases the structural rigidity of the whole axle.- Approach/departure angle optimised by angled exterior surface.- Prolonged carrier bearing life due to extra support of the bearing alignment.- Additional housing strength helps keep the ring & pinion gears meshing on the flat faces of the teeth, greatly increasing ring & pinion life and overall maximum load strength.- Top quality, high power neodymium magnets are used in both the drain plug and the dipstick to collect metallic wear particles as the vehicle moves.- Magnet location in the end of the dipstick allows the oil to be checked for tell-tale signs of internal damage.- Low profile drain plug design resists damage from obstacles.- Combination of the high filler point and dipstick allows the oil to be checked for water contamination without having to drain the oil.- Unique dipstick/filler cap design allows differential oil level to be adjusted for customised high driveline angles.- Cover is powder-coated, CNC machined, then clear coated for a durable, professional, long lasting finish: hardware is zinc plated.- Tensile cap screws, (supplied), are recessed for protection against obstacles which might damage or loosen them.

Use this hose to deliver air from your Compressor throughout your vehicle.

Use this fitting to connect a male JIC-04 flare fitting (for example from a compressor outlet) to a hose where space is limited and the hose must bend sharply.

Use this fitting to connect air tools an accessoriesto an ARB air hose.

Fördermenge: 0 bar 75 l/m, 2 bar 61/mIm Lieferumfang ist ein Kabelstrang sowie der Druckschalter enthalten.Kompakter ARB Kompressor für Festmontage abgedichtetes System teflonbeschichtetet Kolben kugelgelagerter Motor für hohe Lebensdauer und ruhigen Lauf Thermoschutzschalter

Please note:Suits automatic and manualTransmissionSuits only Rear- & Allwheeldrive ModelsRollerfairlead are not compatible to Vehicles with Distance Control.Not suitable for vehicles with the motorcodes MU5 (OM654 DE 20 LA 125KW/170PC) and MU6 (OM654 DE 20 LA 140KW/190PS)Important note:Does not suit current Mercedes Benz mounting directives & Brand GuidelinesPlease note:If the mounting kit is fitted in conjunction with the UVP 29-T060401, the adapter plate 29-T060405 must also be fitted. Installation time: approx. 480 minPlease note: This product is a more cost-effective alternative to the WARN winches. Accessories, such as freewheel lever extensions, may not be compatible. Adjustments may be necessary.

Please note:Suits automatic and manualTransmissionSuits only Rear- & Allwheeldrive ModelsNot suitable for vehicles with the motorcodes MU5 (OM654 DE 20 LA 125KW/170PS) and MU6 (OM654 DE 20 LA 140KW/190PS)Rollerfairlead are not compatible to Vehicles with Distance Control.Please order Synthetic Rope-Set in addtion: 10-1190390Important note:Does not suit current Mercedes Benz mounting directives & Brand GuidelinesPlease note:If the mounting kit is fitted in conjunction with the UVP 29-T060401, the adapter plate 29-T060405 must also be fitted. Installation time: approx. 480 min Attention: If the attachment kit is used in public road traffic, in conjunction with steel cable and roller rope window (unless already excluded by the TÜV certificate), the roller fairlead must be covered by 15-905(E).

The winch kit comes without Socket extension because the VR EVO 10s is a 2in1 Wire & Wirelss solution. If a socket extension is desired, we recommend 1-90395.Fitting time: aprox. 300min (w/o winch) Attention: If the attachment kit is used in public road traffic, in conjunction with steel cable and roller rope window (unless already excluded by the TÜV certificate), the roller fairlead must be covered by 15-905(E).

incl. wired remote control

OPTIMA Battery Red Top 850 S - Starter battery, Measurements: 245 x 172 x 200 mm (length x width x height) Weight: 17,7 kg Nominal voltage: 12-volts Cold Cranking Amps: 850 A at -18 degrees celcius for 30 seconds Start at 0 degrees celcius: 1050 A Guarantee: 24 months Start cycle: over 12,000 times Recharge from empty: 4 times For vehicles with large engines starting in extreme cold for heavy duty equipment including vibrating equipment.

Optima batteries are absolutely maintenance-free and vibration-resistant. They have no acid leakage, can be installed in any position and have better resistance to extreme temperatures.

Set includes TAIO EVO-1 Synthetic Rope, Aluminum Hawse Fairlead and Drum Screw for the WARN VR EVO 8-10 & TABOR 8-10With the TAIO (Taubenreuther-All-In-One) EVO-1 we launch a new generation of winching ropes with more flexibility and strength. Because of the already spliced in soft-shackle(non metal construction), you are able to rigging and winching with a minimum of injury potential than ever before. Also the lower noise level and less scratchers in your vehicle paintwork argues for the TAIO. Some offroad fans mourn after the old days when a 4x4 was raw and martial, but today's 4WD cars have a complex Design and we have to assimilate with our rope, that is nearly complete hidden without a hook is interrupt the shape. PROS: feather-light and flexible with a huge breaking load (9000 daN) made of Vectran® heat-resisting up to 200°C UV resistant XTR coating lower noise level and a minimum of injury potential(Non-Metal-Construction) no hook, no thimble that can scratch the vehicle paintwork signal colour red for easy recover and all works in bad lighting conditions black protective tubing that also covers the whole last layer for a subtly look deliverd in a attractive netbag

Set includes TAIO EVO-1 Synthetic Rope and Aluminum Hawse.With the TAIO (Taubenreuther-All-In-One) EVO-1 we launch a new generation of winching ropes with more flexibility and strength. Because of the already spliced in soft-shackle(non metal construction), you are able to rigging and winching with a minimum of injury potential than ever before. Also the lower noise level and less scratchers in your vehicle paintwork argues for the TAIO. Some offroad fans mourn after the old days when a 4x4 was raw and martial, but today's 4WD cars have a complex Design and we have to assimilate with our rope, that is nearly complete hidden without a hook is interrupt the shape. PROS: feather-light and flexible with a huge breaking load (9000 daN) made of Vectran® heat-resisting up to 200°C UV resistant XTR coating lower noise level and a minimum of injury potential(Non-Metal-Construction) no hook, no thimble that can scratch the vehicle paintwork signal colour red for easy recover and all works in bad lighting conditions black protective tubing that also covers the whole last layer for a subtly look deliverd in a attractive netbag

Synthetic Rope: 30m x 9,5mmInformation Battery: Type: Rechargeable battery Chemical System: Lithium-Ion/ Lithium-PolymerThe successful ZEON concept takes the step!When the innovative Zeon series was launched on the market in mid-2013, it quickly became a success.It is the first winch in a long time that could really be declared a new development and was not just an improved version of a known model. Its symmetrical shape with optional removable control box, internally routed power cables, new gearbox and motor concept and many other details made it one of the most popular winches in the premium segment.WARN did not rest on its success, but launched the ZEON PLATINUM series at the beginning of 2015. They are the first ZEON to be offered as Ultimate Performance winches and rightly bear this title. The Platinum series is the first winch in its class to feature a completely radio-controlled freewheel. There is no need to walk back to the vehicle, and no need to flip the freewheel lever, which can be difficult to access.The wireless remote control sets completely new standards! Ergonomically robust, LCD display and sealed to IP68, it informs about heat generation in the winch, the condition of the vehicle battery, the position of the freewheel clutch and the status of the accessories. The handheld transmitter is charged via USB cable. An adapter for the cigarette lighter is included.Auxiliary devices!! Yes, up to two consumers such as worklights can be connected directly to the winch and managed via the remote control. The two connection ports are designed for 16A (12V/192W). The corresponding connection cables must be ordered separately.Ultimate Performance always stands for more power and even higher quality. The engine is based on the "normal" ZEON, but is 20% faster, more resilient (higher copper content) and more durable than all previously available engines. The already massive gearbox of the ZEON was also revised again for the Platinum.All WARN winches in the ZEON product range are tested to IP68.

Does not fit AXON winches because of "Motactor" control. Please use WARN HUB 1-103940 for the AXON range.Suits WARN R-Series Winches

The VR EVO 10 features IP68-rated waterproof construction, an Albright contactor inside a relocatable control pack, and a corded remote with 3,5m lead. Information Battery: Type: Non rechargeable battery Chemical System: LithiumThe "VR EVO" winch from WARN replaces the "TABOR" series, which has been popular for years, and can boast many innovations compared to the previous model. Features: IP68 tested (only Winch) Faster rope speed under load with lower amperage consumption * Higher pulling capacity per rope layer * 2-in-1 wired & wireless remote control Centrally routed cable exit in the middle of the contactor Reinforced connection plate for higher stability Reliable contactor control Modern & functional design* Compared to Tabor Series