DECKED D-co Case - Sixer 16, tan with black latches
€133.28
Available, delivery time: 1-3 days
Also bought
Please note:Does not fit in prior generation DECKED Drawer SystemsIncludes removable dividers for custom organization.These six different cases are constructed using a mineral reinforced polymer which may prove to make them durable and rugged, tough enough to be run over by a truck and still function perfectly. Engineered to be IP 65 waterproof and dustproof, the D-co Case line is built with particular consideration to stand alone performance, in-drawer functionality, a system-based way of thinking that DECKED calls the D-co system, where everything is designed to work better to work better together. The Clutch Latch on the Sixer 16L and Halfrack 32L allows one hand via a mechanism which actuates two latches by squeezing the handle, popping the case open. A waterproof seal is achieved by simply slamming the lid shut, eliminating the common two-handed, multi step latches found in most cases in this category. Stable Stack is where the D-cosystem thinking stands out. Corresponding geometry between the bases and lids of the cases as well as a coordinated form factor enables the cases to be stacked in any configuration without the worry of them tipping over or sliding off one another (at up to a 45-degree angle). The positive engagement also corresponds to Drawer Systems as cases can find their home in a space efficient manner maximizing storage customization.All of these cases come fitted with a Gore-vent to allow air to pass back and forth keeping the contents inside cozy and dry while being able to adapt to changes in air pressure.
Please note:Does not fit in prior generation DECKED Drawer Systems
Please note:Does not fit in prior generation DECKED Drawer Systems
Please note:Does not fit in prior generation DECKED Drawer Systems.Does not fit Double Cab.These six different cases are constructed using a mineral reinforced polymer which may prove to make them durable and rugged, tough enough to be run over by a truck and still function perfectly. Engineered to be IP 65 waterproof and dustproof, the D-co Case line is built with particular consideration to stand alone performance, in-drawer functionality, a system-based way of thinking that DECKED calls the D-co system, where everything is designed to work better to work better together. The Clutch Latch on the Sixer 16L and Halfrack 32L allows one hand via a mechanism which actuates two latches by squeezing the handle, popping the case open. A waterproof seal is achieved by simply slamming the lid shut, eliminating the common two-handed, multi step latches found in most cases in this category. Stable Stack is where the D-cosystem thinking stands out. Corresponding geometry between the bases and lids of the cases as well as a coordinated form factor enables the cases to be stacked in any configuration without the worry of them tipping over or sliding off one another (at up to a 45-degree angle). The positive engagement also corresponds to Drawer Systems as cases can find their home in a space efficient manner maximizing storage customization.All of these cases come fitted with a Gore-vent to allow air to pass back and forth keeping the contents inside cozy and dry while being able to adapt to changes in air pressure.
Please note: To install a CargoGlide bedslide, you need the following mounting bracket:CGA0110YCGBBLKFeaturing a highly adaptable single drawer with a massive 180 kg capacity, DECKED midsize Drawer System combines weatherproof, lockable, ultra-secure storage with a 454 kg payload-rated, D-ring tie-down equipped deck for unparalleled versatility. Complete RedesignSeeking to maximize storage capacity and eliminate wasted space in the bed, DECKED created one Drawer to replace the two asymmetrical drawers previously offered. Reducing the system payload requirement from 900 kg to 454 kg more accurately reflects the use cases and capacities of modern mid-size trucks. It also enabled engineers to create the single Drawer with a 180 kg payload rating. Drawer spans from wheel well to wheel well and runs the full length of the bed. With 30% more drawer storage capacity than previous versions, midsize customers will now have more than enough space for their tools, camping gear, or bug-out essentials. This drawer can also be reconfigured into a big sliding tray by removing the drawer sides for better access and storage customization with DECKEDs line of D-co Cases.Added Cargo Tie-DownsThe mid-size Drawer System features six burly 180 kg load-rated steel-to-steel bed tie-down locations atop the deck, three on either side. Just as in the fullsize, cargo tie-downs are integrated into the outbound edge of the deck of the system using a D-ring tie down system. When not in use, these D-ring tie-downs lie flat, countersunk in the surface.Enhanced WeatherproofingJust as in the full-size update, increased protection from the outside environment has been realized by adding cabside and drawer-side closeout panels which wrap the drawers in a protective shield as well as a more effective drawer face seal against the elements. These additions vastly reduce the amount of air which can swirl around in the bed and possibly deposit dust or other airborne particulate matter into the drawer.Please Note:The manufacturer does not account for accessories in and on the loading area in the development. Also no original accessories such as lashing rails, style bars or load area protection! These accessories must be dismantled before the drawers assembly and can no longer be used.
Please note: To install a CargoGlide bedslide, you need the following mounting bracket:CGA0100XCGBBLKProviding secure, weatherproof and organized storage for full-size pickup trucks, the DECKED Drawer System features two lockable, full bed-length drawers capable of carrying 90 kgs each. Evenly distributed, the system has a 900 kgs payload-rated deck.Drawer Performance Improvements and SpecsBoasting the same hefty 900 kg payload capacity and 90 kg per drawer weight rating, the full-size Drawer System still weighs in at 90 to 100 kg, depending on bed length. Focusing on drawer functionality, DECKED increased drawer extension, making reaching the back of an open drawer easy and practical. Added Cargo Tie DownsAddressing the complaint of the system covering bed tie downs, users will notice the addition of topside cargo tie downs integrated into the outbound edge of the deck of the system. Eight tie down locations (four per side) have been added with a D-ring tie down system, which lies flat and countersunk in the surface when not in use. These tie downs make a steel-to-steel connection with factory bed tie-downs for a 180 kg load rating. The Drawer System still utilizes factory bed tie-downs for a drill-free installation in nearly all fitments.Greater Truck Bed Space Efficiency, Increased StorageAlso new and vastly improved is the removal of corner bins called Ammo Cans, which formerly connected the system to the truck bed and offered small additional storage compartments. In their place, users will find an uninhibited passthrough to the wheel well both fore and aft outbound of the drawers. This not only enables storage of longer items (camp chairs etc.) but also makes access to side-mounted electrical outlets without any modifications possible, reducing wasted space in the bed to literally just the center support beam. These passthroughs are covered from above by waterproof and lockable stash bin lids. DECKED also includes four removable Stash Bins that lock into these openings from above and can be used or not in any of the four corner locations.Enhanced WeatherproofingDECKED has always been clear that its drawers are not Tupperware-tight, but very effective at keeping the elements out. Designers increased protection from the outside environment by adding cabside and drawer-side panels that enclose the drawers in a protective shield as well redesigning the drawer face to better seal against the elements. These additions vastly reduce the amount of air that can swirl around in the bed and possibly deposit dust or other airborne particulate matter into drawers.Please Note:The manufacturer does not account for accessories in and on the loading area in the development. Also no original accessories such as lashing rails, style bars or load area protection! These accessories must be dismantled before the drawers assembly and can no longer be used.
Please note:Does not fit in prior generation DECKED Drawer Systems
Please note:Does not fit in prior generation DECKED Drawer Systems or VY DECKED Drawer Systems
Please note:Does not fit in prior generation DECKED Drawer SystemsThese six different cases are constructed using a mineral reinforced polymer which may prove to make them durable and rugged, tough enough to be run over by a truck and still function perfectly. Engineered to be IP 65 waterproof and dustproof, the D-co Case line is built with particular consideration to stand alone performance, in-drawer functionality, a system-based way of thinking that DECKED calls the D-co system, where everything is designed to work better to work better together. The Clutch Latch on the Sixer 16L and Halfrack 32L allows one hand via a mechanism which actuates two latches by squeezing the handle, popping the case open. A waterproof seal is achieved by simply slamming the lid shut, eliminating the common two-handed, multi step latches found in most cases in this category. Stable Stack is where the D-cosystem thinking stands out. Corresponding geometry between the bases and lids of the cases as well as a coordinated form factor enables the cases to be stacked in any configuration without the worry of them tipping over or sliding off one another (at up to a 45-degree angle). The positive engagement also corresponds to Drawer Systems as cases can find their home in a space efficient manner maximizing storage customization.All of these cases come fitted with a Gore-vent to allow air to pass back and forth keeping the contents inside cozy and dry while being able to adapt to changes in air pressure.
With the airline track system you are very well prepared for individual requirements of transport orders. Their optimal dimensions and low wall thicknesses mean that they fit into any vehicle contours and are just right for your installation needs. They are flexible in use, resistant to loads and lightweight. In combination with the associated components, they secure even complex transport goods quickly and easily.
Please note:For Guard plate 55-01-0160 you'll need two safety guards.
Please note: To install a CargoGlide bedslide, you need the following mounting bracket:CGA0110YCGBBLKFeaturing a highly adaptable single drawer with a massive 180 kg capacity, DECKED midsize Drawer System combines weatherproof, lockable, ultra-secure storage with a 454 kg payload-rated, D-ring tie-down equipped deck for unparalleled versatility. Complete RedesignSeeking to maximize storage capacity and eliminate wasted space in the bed, DECKED created one Drawer to replace the two asymmetrical drawers previously offered. Reducing the system payload requirement from 900 kg to 454 kg more accurately reflects the use cases and capacities of modern mid-size trucks. It also enabled engineers to create the single Drawer with a 180 kg payload rating. Drawer spans from wheel well to wheel well and runs the full length of the bed. With 30% more drawer storage capacity than previous versions, midsize customers will now have more than enough space for their tools, camping gear, or bug-out essentials. This drawer can also be reconfigured into a big sliding tray by removing the drawer sides for better access and storage customization with DECKEDs line of D-co Cases.Added Cargo Tie-DownsThe mid-size Drawer System features six burly 180 kg load-rated steel-to-steel bed tie-down locations atop the deck, three on either side. Just as in the fullsize, cargo tie-downs are integrated into the outbound edge of the deck of the system using a D-ring tie down system. When not in use, these D-ring tie-downs lie flat, countersunk in the surface.Enhanced WeatherproofingJust as in the full-size update, increased protection from the outside environment has been realized by adding cabside and drawer-side closeout panels which wrap the drawers in a protective shield as well as a more effective drawer face seal against the elements. These additions vastly reduce the amount of air which can swirl around in the bed and possibly deposit dust or other airborne particulate matter into the drawer.Please Note:The manufacturer does not account for accessories in and on the loading area in the development. Also no original accessories such as lashing rails, style bars or load area protection! These accessories must be dismantled before the drawers assembly and can no longer be used.
Not suitable for Ford Ranger PVEH HybridPlease note: To install a CargoGlide bedslide, you need the following mounting bracket:CGA0110YCGBBLKFeaturing a highly adaptable single drawer with a massive 180 kg capacity, DECKED midsize Drawer System combines weatherproof, lockable, ultra-secure storage with a 454 kg payload-rated, D-ring tie-down equipped deck for unparalleled versatility. Complete RedesignSeeking to maximize storage capacity and eliminate wasted space in the bed, DECKED created one Drawer to replace the two asymmetrical drawers previously offered. Reducing the system payload requirement from 900 kg to 454 kg more accurately reflects the use cases and capacities of modern mid-size trucks. It also enabled engineers to create the single Drawer with a 180 kg payload rating. Drawer spans from wheel well to wheel well and runs the full length of the bed. With 30% more drawer storage capacity than previous versions, midsize customers will now have more than enough space for their tools, camping gear, or bug-out essentials. This drawer can also be reconfigured into a big sliding tray by removing the drawer sides for better access and storage customization with DECKEDs line of D-co Cases.Added Cargo Tie-DownsThe mid-size Drawer System features six burly 180 kg load-rated steel-to-steel bed tie-down locations atop the deck, three on either side. Just as in the fullsize, cargo tie-downs are integrated into the outbound edge of the deck of the system using a D-ring tie down system. When not in use, these D-ring tie-downs lie flat, countersunk in the surface.Enhanced WeatherproofingJust as in the full-size update, increased protection from the outside environment has been realized by adding cabside and drawer-side closeout panels which wrap the drawers in a protective shield as well as a more effective drawer face seal against the elements. These additions vastly reduce the amount of air which can swirl around in the bed and possibly deposit dust or other airborne particulate matter into the drawer.Please Note:The manufacturer does not account for accessories in and on the loading area in the development. Also no original accessories such as lashing rails, style bars or load area protection! These accessories must be dismantled before the drawers assembly and can no longer be used.
Please note: To install a CargoGlide bedslide, you need the following mounting bracket:CGA0100XCGBBLKProviding secure, weatherproof and organized storage for full-size pickup trucks, the DECKED Drawer System features two lockable, full bed-length drawers capable of carrying 90 kgs each. Evenly distributed, the system has a 900 kgs payload-rated deck.Drawer Performance Improvements and SpecsBoasting the same hefty 900 kg payload capacity and 90 kg per drawer weight rating, the full-size Drawer System still weighs in at 90 to 100 kg, depending on bed length. Focusing on drawer functionality, DECKED increased drawer extension, making reaching the back of an open drawer easy and practical. Added Cargo Tie DownsAddressing the complaint of the system covering bed tie downs, users will notice the addition of topside cargo tie downs integrated into the outbound edge of the deck of the system. Eight tie down locations (four per side) have been added with a D-ring tie down system, which lies flat and countersunk in the surface when not in use. These tie downs make a steel-to-steel connection with factory bed tie-downs for a 180 kg load rating. The Drawer System still utilizes factory bed tie-downs for a drill-free installation in nearly all fitments.Greater Truck Bed Space Efficiency, Increased StorageAlso new and vastly improved is the removal of corner bins called Ammo Cans, which formerly connected the system to the truck bed and offered small additional storage compartments. In their place, users will find an uninhibited passthrough to the wheel well both fore and aft outbound of the drawers. This not only enables storage of longer items (camp chairs etc.) but also makes access to side-mounted electrical outlets without any modifications possible, reducing wasted space in the bed to literally just the center support beam. These passthroughs are covered from above by waterproof and lockable stash bin lids. DECKED also includes four removable Stash Bins that lock into these openings from above and can be used or not in any of the four corner locations.Enhanced WeatherproofingDECKED has always been clear that its drawers are not Tupperware-tight, but very effective at keeping the elements out. Designers increased protection from the outside environment by adding cabside and drawer-side panels that enclose the drawers in a protective shield as well redesigning the drawer face to better seal against the elements. These additions vastly reduce the amount of air that can swirl around in the bed and possibly deposit dust or other airborne particulate matter into drawers.Please Note:The manufacturer does not account for accessories in and on the loading area in the development. Also no original accessories such as lashing rails, style bars or load area protection! These accessories must be dismantled before the drawers assembly and can no longer be used.
Please note:Does not fit in prior generation DECKED Drawer Systems
Please note:Does not fit in prior generation DECKED Drawer Systems or VY DECKED Drawer Systems
Please note:Does not fit in prior generation DECKED Drawer Systems or VY DECKED Drawer Systems
Please note:Does not fit in prior generation DECKED Drawer SystemsFits EU Midsize Double Cab models - 5' - 5'2"The DECKED Battle Mat is a heavy-duty, robust Nyracord rubber mat designed to prevent your stuff from sliding around on top of the Drawer System.Installs in seconds and can be removed just as quickly. Fits all full-size DECKED Drawer Systems. Does NOT fit fit midsize Drawer Systems. Minor trimming with a sharp blade is required for short full-size Drawer Systems.Features: 100% recycled Nyracord rubber Made in the USA Battle Mat will obscure ruler/conversion chart unless trimmed
Please note:Does not fit in prior generation DECKED Drawer SystemsThe DRAWER LOCK System makes perfect sense to protect your gear.Especially hunters will love the fact, that they can lock the drawers. But also on building sites, in public parking and on Campgrounds the Locks can be very profitably!
Please note:Does not fit in prior generation DECKED Drawer SystemsThe DRAWER LOCK System makes perfect sense to protect your gear.Especially hunters will love the fact, that they can lock the drawers. But also on building sites, in public parking and on Campgrounds the Locks can be very profitably!
Please note:Does not fit in prior generation DECKED Drawer SystemsIncludes removable dividers for custom organization.These six different cases are constructed using a mineral reinforced polymer which may prove to make them durable and rugged, tough enough to be run over by a truck and still function perfectly. Engineered to be IP 65 waterproof and dustproof, the D-co Case line is built with particular consideration to stand alone performance, in-drawer functionality, a system-based way of thinking that DECKED calls the D-co system, where everything is designed to work better to work better together. The Clutch Latch on the Sixer 16L and Halfrack 32L allows one hand via a mechanism which actuates two latches by squeezing the handle, popping the case open. A waterproof seal is achieved by simply slamming the lid shut, eliminating the common two-handed, multi step latches found in most cases in this category. Stable Stack is where the D-cosystem thinking stands out. Corresponding geometry between the bases and lids of the cases as well as a coordinated form factor enables the cases to be stacked in any configuration without the worry of them tipping over or sliding off one another (at up to a 45-degree angle). The positive engagement also corresponds to Drawer Systems as cases can find their home in a space efficient manner maximizing storage customization.All of these cases come fitted with a Gore-vent to allow air to pass back and forth keeping the contents inside cozy and dry while being able to adapt to changes in air pressure.
Please note:Does not fit in prior generation DECKED Drawer SystemsIncludes removable dividers for custom organization.These six different cases are constructed using a mineral reinforced polymer which may prove to make them durable and rugged, tough enough to be run over by a truck and still function perfectly. Engineered to be IP 65 waterproof and dustproof, the D-co Case line is built with particular consideration to stand alone performance, in-drawer functionality, a system-based way of thinking that DECKED calls the D-co system, where everything is designed to work better to work better together. The Clutch Latch on the Sixer 16L and Halfrack 32L allows one hand via a mechanism which actuates two latches by squeezing the handle, popping the case open. A waterproof seal is achieved by simply slamming the lid shut, eliminating the common two-handed, multi step latches found in most cases in this category. Stable Stack is where the D-cosystem thinking stands out. Corresponding geometry between the bases and lids of the cases as well as a coordinated form factor enables the cases to be stacked in any configuration without the worry of them tipping over or sliding off one another (at up to a 45-degree angle). The positive engagement also corresponds to Drawer Systems as cases can find their home in a space efficient manner maximizing storage customization.All of these cases come fitted with a Gore-vent to allow air to pass back and forth keeping the contents inside cozy and dry while being able to adapt to changes in air pressure.
Please note:Does not fit in prior generation DECKED Drawer SystemsThese six different cases are constructed using a mineral reinforced polymer which may prove to make them durable and rugged, tough enough to be run over by a truck and still function perfectly. Engineered to be IP 65 waterproof and dustproof, the D-co Case line is built with particular consideration to stand alone performance, in-drawer functionality, a system-based way of thinking that DECKED calls the D-co system, where everything is designed to work better to work better together. The Clutch Latch on the Sixer 16L and Halfrack 32L allows one hand via a mechanism which actuates two latches by squeezing the handle, popping the case open. A waterproof seal is achieved by simply slamming the lid shut, eliminating the common two-handed, multi step latches found in most cases in this category. Stable Stack is where the D-cosystem thinking stands out. Corresponding geometry between the bases and lids of the cases as well as a coordinated form factor enables the cases to be stacked in any configuration without the worry of them tipping over or sliding off one another (at up to a 45-degree angle). The positive engagement also corresponds to Drawer Systems as cases can find their home in a space efficient manner maximizing storage customization.All of these cases come fitted with a Gore-vent to allow air to pass back and forth keeping the contents inside cozy and dry while being able to adapt to changes in air pressure.
Please note:Does not fit in prior generation DECKED Drawer Systems
Muli-Rack System including 3 Rhino Rack Heavy Duty Crossbars (black)Kit contains Muli-Rack Kit XtraCab "extended" (adjustable Height) 3 Mounting kits for HD Crossbars 3 Rhino Rack HD Crossbars (black, 1375mm) Please note: Mounting is only possible with the models listed below if you also order the Muli-Rack clamp mount 55-01-0290.For DoubleCab Kits (55-02..., 55-04...) 2 pairs are needed.For XtraCab Kits (55-01..., 55-03...) 3 pairs are needed. Mitsubishi L200 2015 on Fiat Fullback Attention: The clamp bracket cannot be used in conjunction with winch attachment kit 55-01-0240. In this case, the holders must be bolted to the inner edge of the cargo bed behind the driver's cab. Due to the screw connection, only 2 pairs are required for XtraCab sets and 1 pair for DoubleCab Kits.
Neccessary for all vehicles with 3rd Break light is covered by Muli-Rack System.
Please note:For assembling two safty guards 55-010-0150 are required.
for HD bars use 50-13HD-FK1 fitting kitFor mounting on a Pioneer 6 platform, {50-19HSIT} is required.
The Rhino-Rack Spade is a compact tool of 1065mm / 42" in length that allows quick storage and perfect for getting under bogged vehicles. Constructed of heavy duty heat treated Hi-Carbon Steel, zinc plated and powder-coated resulting with maximum strength and rust protection.Detailed with a slip resistant grip and dual core construction providing greater strength and control for all weather conditions. The Rhino-Rack Spade is designed for comfort, ease of use and convenience.Features: 1065mm length for increased maneuverability under vehicles Shaft diameter: 30mm Compact size also aids in storage Blade constructed of Heavy duty heat treated Hi-carbon Steel Zinc plated and powder-coated for maximum strength and rust protection Non-slip rubber grip handle provides comfort Dual core construction provides added strength
The brushless motors of the new ARB compressors deliver up to 50% more power compared to the previous ARB compressors.The brushless technology means that the compressors require less maintenance, as there are no components that are vulnerable to wear. Electronically controlled fans ensure that the operating temperature of the compressor remains optimal by continuing to run even when the compressor is no longer in use.The system also offers protection against voltage peaks, drops or fluctuations and against overcurrent. Integrated live diagnostics provide acoustic and visual warnings to detect problems early on.
The brushless motors of the new ARB compressors deliver up to 50% more power compared to the previous ARB compressors.The brushless technology means that the compressors require less maintenance, as there are no components that are vulnerable to wear. Electronically controlled fans ensure that the operating temperature of the compressor remains optimal by continuing to run even when the compressor is no longer in use.The system also offers protection against voltage peaks, drops or fluctuations and against overcurrent. Integrated live diagnostics provide acoustic and visual warnings to detect problems early on.
With the TAIO (Taubenreuther-All-In-One) EVO-1 we launch a new generation of winching ropes with more flexibility and strength. Because of the already spliced in soft-shackle(non metal construction), you are able to rigging and winching with a minimum of injury potential than ever before. Also the lower noise level and less scratchers in your vehicle paintwork argues for the TAIO. Some offroad fans mourn after the old days when a 4x4 was raw and martial, but today's 4WD cars have a complex Design and we have to assimilate with our rope, that is nearly complete hidden without a hook is interrupt the shape. PROS: feather-light and flexible with a huge breaking load made of Vectran® heat-resisting up to 200°C UV resistant XTR coating lower noise level and a minimum of injury potential(Non-Metal-Construction) no hook, no thimble that can scratch the vehicle paintwork signal colour red for easy recover and all works in bad lighting conditions black protective tubing that also covers the whole last layer for a subtly look deliverd in a attractive netbag