UPRACKS extendible Bed Slider universal, up to 600Kg loadcapacity

Messy and pinched cables for your fridge or batteries are now a thing of the past with the new ARB Cable Guide accessory.The cable guide provides an enclosed track for your fridge or battery cables to seamlessly move with the sliding motion of the fridge roller, preventing cables dropping down into your drawer below, or getting caught on your cargo while in motion. To To assist with the mounting and aligning of the cable guide, two powder coated brackets position your cables before they enter the cable runner. Suitable for use with most automotive cables and ARB roller floors (RF), (RFH) & (RDRF) drawer modules of any size, the cable guide can also be shortened to accommodate fridge size and drawer length.Features: Keeps cables from being tangled, demaged and out of the way of cargo Suits most Fridges 12V power cables and automotive cables Steel brackets with hardwearfinished black powder coat 1000mm length suitable for all ARB drawer systems length can be Adjusted to suit drawer travel Great add-on accessory to any drawer and fridge purchaseDimensions Length: 1000mm Inner size: 10mmx11mm Outer size: 14mmx17,5mm

Plug is equal to socket and therefore very versatile. For that reason, 2 pieces are needed for one plug connection.For cable diameters up to max. 16 mm². For smaller cable diameters, the stripped piece may have to be folded over. The contacts are crimped with cable crimping tools (not included in the shipment)

The ARB BASE Rack Auxillary Light is the newest addtion to the BASE Rack accessories. Including unique ARB BASE Rack bracket, over-moulded DT connector suitable for ARB's BASE Rack channeling and an additional DT connector for custom wiring.The unique ARB BASE Rack bracket provides installation to any part of the dovetail system and provide additional lighting around the vehicle for camping and work vehicles. By not using the ARB BASE Rackbracket the stainless bracket allows for fitting to ARB Classic racks.The two 10W OSRAM LEDs (20W total) provides strong lighting that spreads light over a large area, making the beam a true area light and minimising hot spots from focused beams.Features: 20W power consumption/1.5A 1.100 lumens Compliance to IP69K, ECE, R10, CISPR 25/5 standarts Included in delivery: 1 x 20W LED Auxillary Light 1 x Bracket to suit the ARB BASE Rack or Classic racks 1 x male & 1 x female DT connectors

Will also suite WARN AXON45RC.

Own Weight: ca. 17 kg

Suits only in conjuction with CAN Module 5-A-5013-10-01.

Das Modul wurde speziell für den VDO Unfalldatenschreiber entwickelt. Es erlaubt den Anschluss des UDS direkt am CAN Modul. Zur Verfügung gestellte Ausgänge: Begrenzungsleuchten, Fahrlicht, Fernlicht, Blinker links, Blinker rechts, Warnblinker, Fußbremse, Geschwindigkeit, Zündung Alle Ausgänge außer Geschwindigkeit sind durch 1 A Treiber geschützt und erhöhen die Zuverlässigkeit des Produktes. Anschlüsse: Rot 12v+ Schwarz Masse Weiß CAN High Blau CAN Low Blinker links = Orange Blinker rechts = Braun Speed Grün Bremse Pink Zündung Lila Seitenlicht Blau Licht Gelb Fernlicht Grau

Features: 20W power consumption 600 - 1200 lumens depending on colour temperature Can switch between three light colours (white, warm and amber) Compliance to IP69K, ECE, R10, CISPR 25/5 standarts Included in delivery: 1 x 20W LED Auxillary Light 1 x Bracket to suit the ARB BASE Rack or Classic racks

Headlight set for mounting two Osram SX180-SP lights.Suits also Taubenreuther Snowplow carrier and winch mounting as well as Multi-Mount receiver.With our CAN bus high beam converter and the matching, vehicle-specific wiring loom, we cover all versions of the Ford Ranger and VW Amarok. Set contains: 1 x Vehicle specific mounting carrier 1 x Screw set 2 x Osram Spot Headlights 1 x Wiring kit 1 x CAN-Bus High Beam Converter Wiring harness for tapping the high beam signal from the CAN BusVehicle specific headlight kit that not only provides great light output, but also adds a nice accent without disturbing the vehicle design.Installation instructions for low beam & high beam (ECE R112):Based on ECE R112 (low beam & high beam control), headlamps must be installed in pairs (cars max. 4 & trucks max. 6 high beam sources with direct wiring.Each certified headlight has a reference number (abbreviated as REF. NO. in our texts). This is located directly on the lens cover or the housing. The sum of all reference numbers of the headlamps fitted to the vehicle (original + additional certificate) must not exceed 100!We recommend a professional Workshop. Also a switch is included to make a separate circuit. But this soulution is not StVZO compatible.

The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

This Skid Plate is highly recommended if the original side rocker are to be removed, to protect the wiring, control units etc. located there on the frame.Not compatible with the original side rocker.Matching flank protection tubes / Rocksliders: 29-T0503050The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

Suits 2,0L / 3,0L automatic and manual transmission. Also fits Ranger Raptor 11/22 on diesel models.The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

The front skid plate is also compatible with ARB Recovery Points.Part numbers2-2840060 & 2-2840070The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

Suitable for diesel and petrol models.Remote control 1-90287-1 can be ordered separately.Kit contains: Winch Carrier WARN M8000 Synthetic rope TAIO 27m x 9,4mm Aluminium hawse fairlead silver Screw kit Rear guard plate for mid range winches 16-0512 Fuse Kit 500A 16-2190 Fitting Instructions TÜV CerftificationFitting time: 360 min w/o wiring WARN M8000 With a capacity of 8,000 lb, WARN's M8000 winch offers excellent reliability and is one of the classic premium winches that that has been appreciated by offroaders for years. A variety of mounting options are made possible by the winch's low-profile design. They are best suited for regular use on 4x4 vehicles.Features: Premium series winch with classic design, proven performance and the legendary WARN reliability Control box with contactor and wired hand-held remote control The flat design and the separate control box allow a variety of mounting options Exclusive brake design provides excellent control during winch operation Durable 3-stage planetary gear for smooth, reliable operation The standard coiled motor ensures high rope speed and high rope speed and strong tractive forces Chip-repellent powder-coated Surface Steel or synthetic rope

Dimension:158,75mm (Width, NOT hole pattern)Suits:WARN Vantage 3000-S & 2000-S

Does not fit AXON winches because of "Motactor" control. Please use WARN HUB 1-103940 for the AXON range.Suits WARN R-Series Winches

PLEASE NOTE: To install the canopy, Load Box Reinforcement Brackets must be installed in your vehicle. If the J-Braces have not already been ordered from your VW dealer, you can order the from us under following part numbers: J-Braces AMAROK 6-RJBRACEP703 Canopys may not be mounted without J-Braces.The SmartCap EVO Defender is built for extreme on- and off-road use. From its 7-piece modular stainless steel design, to the double walled stainless steel Gullwing doors with interior Molle panels for mounting your gear, this SmartCanopy will take all the adventure you can throw at it.As standard, the RSI EVO Defender is equipped with stainless steel side flaps and solid rear door. There are no glass inserts in the canopy.Colour: matte blackOwn Weight: ca. 85 kgFeatures: Automotive grade ferritic stainless steel Modular design: kit consisting of five elements High load capacity: 45 kg (dynamic/static), Limited by manufacturer factory specifications. Standard accessories: C-rails for mounting a Roof carrier Additional ventilation system on the roof Lockable side and rear doors Third brake light (on vehicles, with the third brake light on the tailgate, the brake light on the hardtop must not be connected, as long as it is not covered by the hardtop) Attention:All RSI EVO hardtops are supplied as a kit and must be assembled prior to installation.This will require various tools, as well supplies (e.g. superglue & silicone, etc.). We always recommend to have the assembly as well as the installation done by a professional workshop.The manufacturer takes into account in the development of no accessories on and in the loading area! Also no original accessories such as lashing rails, style bars or load area protection! These accessories must be dismantled before the hardtop assembly and can no longer be used.Leaking:No pickup bed is 100% waterproof. For this reason RSI does not take this into account in the design. RSI Canopies consist of 5 elements an water penetration can occur at any connecntion point. Also the slide windows are not made for european weather conditions.

PLEASE NOTE: To install the canopy, Load Box Reinforcement Brackets must be installed in your vehicle. If the J-Braces have not already been ordered from your VW dealer, you can order the from us under following part numbers: J-Braces AMAROK 6-RJBRACEP703 Canopys may not be mounted without J-Braces.The SmartCap EVO Adventure is built for extreme on- and off-road use. From its 7-piece modular stainless steel design, to the double walled stainless steel Gullwing doors with interior Molle panels for mounting your gear, this SmartCanopy will take all the adventure you can throw at it.As standard, the RSI EVO Adventure is equipped with stainless steel side flaps without glass insert.Colour: matte blackOwn Weight: ca. 85 kgFeatures: Automotive grade ferritic stainless steel Modular design: kit consisting of five elements High load capacity: 45 kg (dynamic/static), Limited by manufacturer factory specifications. Standard accessories: C-rails for mounting a Roof carrier Additional ventilation system on the roof Lockable side and rear doors Third brake light (on vehicles, with the third brake light on the tailgate, the brake light on the hardtop must not be connected, as long as it is not covered by the hardtop) Attention:All RSI EVO hardtops are supplied as a kit and must be assembled prior to installation.This will require various tools, as well supplies (e.g. superglue & silicone, etc.). We always recommend to have the assembly as well as the installation done by a professional workshop.The manufacturer takes into account in the development of no accessories on and in the loading area! Also no original accessories such as lashing rails, style bars or load area protection! These accessories must be dismantled before the hardtop assembly and can no longer be used.Leaking:No pickup bed is 100% waterproof. For this reason RSI does not take this into account in the design. RSI Canopies consist of 5 elements an water penetration can occur at any connecntion point. Also the slide windows are not made for european weather conditions.

Does not suit AXON Winches! Therefor you'll need part number 1-103940Suits VRX, Vantage, ProVantage andR-Series

Does not suit AXON Winches! Therefor you'll need part number 1-103940This state-of-the-art wireless control system allows you to operate your truck winch using the Bluetooth connection on your smart device. Compatible with any contactor-controlled WARN truck winch, including ZEON, VR, VR EVO, and newer Heavyweight and Classic series winch models.The HUB Wireless Receiver - 100 ft. or more wireless range Rugged construction - fully molded housing offers IP68 waterproof sealing Quick to install - receiver mounts to any tube or flat surface and wiring takes less than 5 minutes on most models Easy to connect - iOS and Android compatible and connects via Bluetooth Built-in D-plug connects to the winch just like any wired remote 6 (1.8m) long wiring harness allows the receiver to be securely mounted remotely When paired with the App, this receiver allows the user to control the winch and receive battery voltage feedback. Compatible with any contactor-controlled WARN truck winch, including ZEON, VR, VR EVO, and newer Heavyweight and Classic series winch models

Please note:The Warn Drill Winch is not for liftingHow do you turn a mere handheld power drill into a portable, versatile pulling tool? With the rugged, versatile, and easy-to-use WARN Drill Winch. From moving heavy nursery stock, to pulling load up onto a trailer, the 750 lbs. capacity Drill Winch does the hard-to-handle pulling jobs. Pros: Lightweight and portable, with a 750 lbs single-line pulling capacity Powered by standard portable drill (not included) Free-spool clutch makes rigging fast and easy Includes 40 feet of synthetic rope, integrated hawse fairlead, and rigging hooks (front and rear)

The RSI Stow Away Table is mounted on the headliner of the hardtop interior and can be easily removed by a folding mechanism and stowed away while driving to save space.

Own Weight: ca. 17 kg

Forged from stainless steel (not fiberglass). It could be correctly said it´s built like a truck, not a boat.From its 5-piece modular construction, to its sleek bondes glass, to the large Gullwing Door openings, Universal Roof Rails, Sliding Vent Windows, Positive Pressure Air Vent and more.. it´s safe to say, SmartCanopy is in league of its own.As standard, the RSI EVO Sport is equipped with side glass flap windows and a small additional sliding window.Colour: matte blackOwn Weight: ca. 85 kgFeatures: Automotive grade ferritic stainless steel Modular design: kit consisting of five elements High load capacity:350 kg (static) and 150 kg (dynamic)Standard accessories: C-rails for mounting a Roof carrier Additional ventilation system on the roof Lockable side and rear doors Third brake light (on vehicles, with the third brake light on the tailgate, the brake light on the hardtop must not be connected, as long as it is not covered by the hardtop) Attention:All RSI EVO hardtops are supplied as a kit and must be assembled prior to installation.This will require various tools, as well supplies (e.g. superglue & silicone, etc.). We always recommend to have the assembly as well as the installation done by a professional workshop.The manufacturer takes into account in the development of no accessories on and in the loading area! Also no original accessories such as lashing rails, style bars or load area protection! These accessories must be dismantled before the hardtop assembly and can no longer be used.Leaking:No pickup bed is 100% waterproof. For this reason RSI does not take this into account in the design. RSI Canopies consist of 5 elements an water penetration can occur at any connection point. Also the slide windows are not made for european weather conditions.

Fits Ford Ranger P703 & Ford Ranger Raptor P703. PLEASE NOTE: To install the canopy, Load Box Reinforcement Brackets must be installed in your vehicle. If the J-Braces have not already been ordered from your Ford dealer, you can order the from us under following part numbers: For the Ford Ranger 6-RJBRACEP703 For the Ford Ranger Raptor 6-RJBRACERAPT Canopys may not be mounted without J-Braces.The SmartCap EVO Defender is built for extreme on- and off-road use. From its 7-piece modular stainless steel design, to the double walled stainless steel Gullwing doors with interior Molle panels for mounting your gear, this SmartCanopy will take all the adventure you can throw at it.As standard, the RSI EVO Defender is equipped with stainless steel side flaps and solid rear door. There are no glass inserts in the canopy.Colour: matte blackOwn Weight: ca. 85 kgFeatures: Automotive grade ferritic stainless steel Modular design: kit consisting of five elements High load capacity: 45 kg (dynamic/static), Limited by manufacturer factory specifications. Standard accessories: C-rails for mounting a Roof carrier Additional ventilation system on the roof Lockable side and rear doors Third brake light (on vehicles, with the third brake light on the tailgate, the brake light on the hardtop must not be connected, as long as it is not covered by the hardtop) Attention:All RSI EVO hardtops are supplied as a kit and must be assembled prior to installation.This will require various tools, as well supplies (e.g. superglue & silicone, etc.). We always recommend to have the assembly as well as the installation done by a professional workshop.The manufacturer takes into account in the development of no accessories on and in the loading area! Also no original accessories such as lashing rails, style bars or load area protection! These accessories must be dismantled before the hardtop assembly and can no longer be used.Leaking:No pickup bed is 100% waterproof. For this reason RSI does not take this into account in the design. RSI Canopies consist of 5 elements an water penetration can occur at any connecntion point. Also the slide windows are not made for european weather conditions.

Suits only vehicles without ARB Canopy. OE torsion bar must be fitted.If your Tailgate is fitted with an OE ball stud, please use the Tailgate Assist 6-4770030 instead.The tailgate assistant supports not only the opening but also the closing of the heavy tailgate.A high-quality Stabilus damper brakes the tailgate from falling down during opening, thus protecting the material and reducing the risk of injury. Closing the tailgate is in turn facilitated by torsion bar/damper (depending on the vehicle model). Thus, one-hand operation is possible.

Dieses System unterstützt nicht nur das Öffnen, sondern auch das Schließen der schweren Heckklappe. Ein hochwertiger Stabilus Dämpfer bremst beim Öffnen das Runterfallen und schont damit das Material und vermindert Verletzungsgefahren. Das Schließen der Heckklappe wird wiederum durch einen Drehstab erleichtert. Somit ist eine Einhandbedienung möglich.

Headlight mounting for radiator grill fits only OSRAM SX180-SPVehicle specific headlight kit that not only provides great light output, but also adds a nice accent without disturbing the vehicle design.Kit includes: Vehicle specific mounting carrier (incl. Fitting Instruction) 2x OSRAM Spot Headlights 36-3LEDDL105-SP 1x Universal Cable Harness 2-3500520The Universal Cable harness enable a integration to the Vehicle driving beam. For some vehicles it may have to be reworked. We recommend a professional Workshop. Also a switch is included to make a separate circuit. But this soulution is not StVZO compatible.

The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

Only for V6 petrol engines, does not fit diesel models. Partnumber for diesel models: 29-T050302 Skid Plate Transmission.The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

Only for V6 petrol engines, does not fit diesel models. Partnumber for diesel models: 29-T050302 Skid Plate Transmission.The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

Does not suit in conjunktion with Taubenreuther Winch mounting kit 16-8340... wich already has a front skid plate integrated.Fittment with Taubenreuther Multi-Mount front Receiver 1-259410 is confirmed.Fitting time: approx. 30 minThe skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.

The skid plates are made of 6mm quality aluminium and are screwed to original attachement points of the vehicle.