Wheel spacers +60 mm 139,7 x 6

werden benötigt um Heavy Duty Querträgerund Pioneer Plattformen auf RLT600 undRCH Füßen zu montieren und dienen alsHöhenausgleich

For this Basekit the legkits RCH or RCL must be used.The RCH / RCL Locking Legs are designed with a key locking system to reduce wind resistance and increase security. This unique design helps reduce noise without compromising durability and load carrying capacity.Available in two difference heights: RCH: 52mm RCL: 37mm

The RCH / RCL Locking Legs are designed with a key locking system to reduce wind resistance and increase security. This unique design helps reduce noise without compromising durability and load carrying capacity.Available in two difference heights: RCH: 52mm RCL: 37mm

rear axle, heavy dutyThe classic OME Nitrocharger is a 2-tube gas pressure shock absorber in low pressure design. It was developed at the end of the 80s specifically for the requirements in the 4x4 area and improved over the decades in the individual components again and again.The Nitrocharger is still used today in older vehicles, where a new development is too complex due to the expected quantities, or in newer applications, where a Nitrocharger Sport is technically not possible.The OME engineers always paid special attention to the length. Where it is possible without major modifications to the vehicle, the Nitrocharger is extended by up to 50mm.This makes it possible to use them with both the stock springs and the OME uprated springs, with a few exceptions.The facts in the overview: 35mm working piston with integrated, multi-stage rebound valve as well as friction-reducing Teflon sealing Extra strong, hard chromed 18mm piston rod Unique 3-lip seal ring with check valve and generous piston rod guide for excellent upper sealing Multi-stage compression valve at the bottom of the working cylinder for the best possible response and driveability Steel stone guards for the piston rod wherever space permits Durable polyurethane or rubber bushings; for struts, the original parts or OME replacement parts can be used at the top end

werden für Heavy Duty Querträger undPioneer Plattformen auf RLT600 und RCHFüße benötigt, wenn Höhenausgleichgeschaffen werden muss.

The Rhino Rack folding antenna mount provides 180 degree rotation for antennas, flags, small LEDs and lights.The mount can be installed on roof racks and Pioneer systems, as well as with a C-channel mount and direct attachment to many popular bullbar brands.The bracket can also be mounted square or parallel.Drilling for antenna: 17mmHeight approx: 86mmThis article can also be combined with the Zwifloc Channel nuts (for Pioneer Platforms and Reconn-Deck bars).NOTE: Additional accessories may be required for installation. Please refer to the Zwifloc compatibility list.

To attach for example spare wheel strap 50-1643178 on the Pioneer platform.

This rail kit is attached to the roof by using rivets. This requires drilling in the roof.

This rail kit is attached to the roof by using rivets. This requires drilling in the roof.

OSRAM's LED worklights and auxiliary lights offer the most demanding LED technology on the market.Attention: High beam and fog lights must be installed in pairs (except single mount).The manufacturer OSRAM grants a warranty of 5 years on LED worklights and auxiliary lights.The warranty conditions, scope as well as the address(es) of the manufacturer can be found at:www.osram.deYour statutory warranty remains unaffected.